Features

Spektrum AR635 DSMX receiver with AS3X System, installed

Powerful 10-size BL outrunner, 1250Kv, installed

E-flite 40A Lite Pro Switch-Mode BEC brushless ESC (V2), installed

E-flite 13-gram digital micro servos, installed

Clear belly window for monitoring AS3X System status

Carbon-reinforced Z-Foam construction

Leading-edge vortex generators

Double-beveled hinges for large control surface throws

Durable wire landing gear and large wheels for flying off grass

Two-piece wing for easy transportation and repair

Sharp Mirco Pecorari signature trim scheme

Includes 3S 2200mAh 25C Li-Po battery

Includes 2- to 3-cell DC variable rate charger

Requires a full-range 4+ channel DSM2/DSMX aircraft transmitter, sold separately

Overview

The ParkZone VisionAire park flyer is specifically designed for sport pilots by 3D pioneer Quique Somenzini. Its wings are constructed of hollow Z-Foam_†¢ material that has been reinforced with carbon fiber to create structures that are stiffer and lighter than solid foam. This rigid, lightweight airframe is paired with a powerful 10-size, 1250Kv brushless motor that delivers the vertical performance you need for an exhilarating 3D flying experience.

What makes the VisionAire model such a great 3D plane for sport pilots is the advanced AS3Xëå (Artificial Stabilization 3-aXis) System built into its AR635 receiver. The AS3X System works behind the scenes to counter the effects of wind and turbulence, using 3-axis sensing and flight control software tuned by Quique Somenzini. If you_Ñéve never flown 3D before, this enhanced stability will give you the confidence you need to try high alpha maneuvers like harriers, hovers, torque rolls and more.

You can adjust the amount of stability the AS3X System provides or turn it off completely, but even 3D pros will find flying with it on feels completely natural. There are no delays in control response or limits on the control throws. You_Ñéll simply feel like you are flying an expertly-tuned model that goes right where you point it.

Tech Notes

You will need...

- A 4+ channel full-range DSM2ëå- or DSMX-compatible transmitter.

Specifications

Wingspan: 45.0 in (1143mm)

Overall Length: 42.5 in (1088mm)

Wing Area: 539 sq in (34.8 sq dm)

Flying Weight: 43.7 oz (1240 g)

Motor Size: 10-size BL10 brushless outrunner, 1250Kv (installed)

Radio: AR635 6-channel DSMXëå AS3Xëå sport receiver (installed)

Servos: (4) 13 g digital high-speed servos (installed)

Trim Scheme Colors: Blue, red

CG (center of gravity): 4.5 in (115mm) back from the leading edge of wing at wing root

Wing Loading: 11.7 oz/sq. ft. (35 g/sq. dm.)

Prop Size: 12 x 4

Spinner Size: 1.57 in (40mm)

Speed Control : 40-amp Lite Pro Switch-Mode BEC brushless (installed)

Recommended Battery: 11.1V 3S 2200mAh 25C Li-Po (included)

Control Throw (Ailerons): Low: 70% up/down, 15% expo; High: 100% up/down, 25% expo

Control Throw (Elevator): Low: 70% up/down, 15% expo; High: 100% up/down, 20% expo

Control Throw (Rudder): Low: 70% right/left, 10% expo; High: 100% right/left, 15% expo

Approx. Flying Duration: 6 minutes

Charger: 2-3 cell DC Li-Po balancing charger

Minimum Age Recommendation: 14 years

Experience Level: Intermediate

Recommended Environment: Outdoor

Assembly Time: Less than 1 Hour

Is Assembly Required: Yes