TRAXXAS

These are replacement stub axle pins for the Nitro Buggy, Nitro Street, TRX-3, Rad 2, TRX-1, Hawk 2, and Blue Eagle LS II. These pins slide through the axle and hold the wheel to the axle. INCLUDES:...

These are the Rear Stub Axles for the Traxxas Bandit, Stampede and Rustler. FEATURES: Metal construction, black and silver in color INCLUDES: Two rear stub axles and pins SPECS: Length: 1.65"...

This is a set of telescoping drive shafts for the Blue Eagle LS II. Includes: 2 white nylon telescoping shaft (each shaft is made of two pieces) 4 aluminum U-joints

These are the Shoulder Screws for the Traxxas T-Maxx 3.3. FEATURES: Black steel construction INCLUDES: Six steel shoulder screws SPECS: Length: 12mm Diameter: 3mm

Overview Traxxas progressive-rate springs are custom-wound to provide responsive control for small bumps, with a progressively stiffer rate to absorb harder impacts. Spring rates are identical to...

Overview Traxxas progressive-rate springs are custom-wound to provide responsive control for small bumps, with a progressively stiffer rate to absorb harder impacts. Spring rates are identical to...

This is a Traxxas 48P, 76T Spur Gear for models with Torque Control Slipper Clutch. FEATURES: 48 pitch 76 tooth Designed for models with a slipper clutch. Black plastic construction INCLUDES: One...

This is a Traxxas 48P, 83T Spur Gear for models with Torque Control Slipper Clutch. FEATURES: 48 pitch 83 tooth Designed for models with a slipper clutch. Black plastic construction INCLUDES: One...

This is a Traxxas 48P, 86T Spur Gear for models with Torque Control Slipper Clutch. FEATURES: 48 pitch 86 tooth Designed for models with a slipper clutch. Black plastic construction INCLUDES: One...

Features: Equipped with the Traxxas high-current connectors for restriction-free current flow Innovative watersealed design 15-turn motor limit for 540 size motors 12-turn motor limit for 550...

This set of rod ends, balls, and screws is used on all but four of Traxxas' kits. It WILL NOT WORK ON: the Sledgehammer, original Hawk, Cat, or Bullet. Includes: 4 short rod ends (17mm) 16 long rod...

This is a Rod End Set for the Traxxas Revo used with the optional GTR shocks. FEATURES: Plastic construction Black in color INCLUDES: Six Rod Ends REQUIRES: Assembly to vehicle SPECS: Length: 18.35mm...

These are the GTR Red Shock Springs for the Traxxas Slayer. FEATURES: 2.0 lb/in tension Red coating ...

This is the optional Blue Aluminum Motor Mount for the Traxxas Slash 4X4 ...

Traxxas Steel 32 Pitch Pinion Gear. These gears are intended for use with the Traxxas Stampede 4x4 and are available in multiple tooth count options to fine tune the gear ratio of your vehicle...

This is the optional 32P 9 Tooth Pinion Gear for the Traxxas Stampede 4x4 VXL. FEATURES: Steel construction INCLUDES: 32P 9 Tooth Pinion Gear with Set Screw REQUIRES: Fastening to motor...

Traxxas Rear Suspension Hinge Pin Mount Set. These blocks feature different anti-squat angles which will alter the suspension characteristics of the vehicle. Package includes one 1.5°, one 2...

This is the Front and Rear Skid Plates for the Traxxas Revo. FEATURES: Black plastic construction Front skid plate is a two-piece design Rear skid plate is a one-piece design INCLUDES: Front and...

This is a 2.5mm Lock Nut Set for the Traxxas Revo. This product features: Steel construction ...

These are the Lower Suspension Arms for the T-Maxx 3.3. FEATURES: Helps to support axle carriers and shocks Black in color, constructed of hardened plastic INCLUDES: One Right and one Left Lower...

These are the Upper Suspension Arms for the T-Maxx 3.3. FEATURES: Fastens to bulkhead and helps to...

This is the Optional Stainless Steel Suspension Pin Set for the Traxxas T-Maxx or E-Maxx Monster Trucks. These suspension pins hold the upper and lower front and rear...

These are the Left and Right Steering Blocks for the Traxxas Bandit, Stampede and Rustler VXL series. FEATURES: Plastic construction Black in color INCLUDES: One left and right steering blocks...

These are Castor Blocks for the Traxxas Rustler and Stampede. FEATURES: Black Plastic Construction INCLUDES: Two Blocks REQUIRES: Traxxas Rustler or Stampede

This is a pair of chrome suspension pins used to hold the front suspension arms on the TRAXXAS SRT, NITRO STAMPEDE, and NITRO RUSTLER. Includes: two chrome suspension pins and three "E" type...

This is the Complete Planetary Gear Differential With Steel Ring Gear for the Traxxas Bandit, Stampede and Rustler. ...

Features Made from lightweight 6061-T6 aluminum Overview Lightweight 6061-T6 aluminum hex wheel hubs fit with greater precision and look awesome installed on the axles. You’ll never have to...

These are the replacement rear wheel adapters for the Hawk, Hawk 2, Bullet, Sledgehammer, Eagle, and Blue Eagle LS. These are hex nuts that connect the rear wheels to the axles. INCLUDES: 2-...

This is the 56 Tooth Spur Gear for the Traxxas Nitro Jato Stadium Truck. FEATURES: Nylon construction Black in color .8 metric pitch   INCLUDES:One 56T 0.8 Pitch Spur...

This is the 54 Tooth Spur Gear for the Traxxas Nitro Jato Stadium Truck. FEATURES: Nylon construction Black in color .8 Module pitch   INCLUDES:One 54T 0.8 Pitch Spur...