TRAXXAS

This is the Chassis Upper Deck for the Traxxas Nitro Rustler. It supports the Steering Servo and strengthens the upper chassis area. FEATURES: Nylon Construction Black in color INCLUDES: One Upper...

THIS IS THE TRAXXAS TRX 3.3 RACING ENGINE WITHOUT STARTER. FEATURES: 1-PIECE IPS CRANKSHAFT, SLIDE-VALVE CARB, AIR FILTER, OIL, GLOW PLUG FOR USE IN ALL TRAXXAS TRX2.5 AND TRX 3.3 VEHICLES W/FLYWHEEL...

This is the Electric Powered, 2.4GHz Radio Controlled, 1/18 scale Ready-to-Run Latrax SST Stadium Truck. FEATURES: Chassis: Molded composite nylon monocoque Drive: Four wheel shaft Motor: 370 brushed...

These are the Rear Suspension Arms for the Traxxas Electric SRT, Nitro Rustler, Nitro Sport and Nitro Stampede Kits. FEATURES: Durable Black plastic construction INCLUDES: One left suspension arm...

Hop-Up replacement Shock Caps (Big Bore) are designed to fit Traxxas Big Bore shocks: TRAC4960 Long Big Bore TRAC4961 Extra Long PACKAGE CONTAINS: 2-Caps FEATURES: Round aluminum caps with threaded...

These are Shock Caps and Bottoms for Traxxas kits. These seal the shock containing the shock oil. FEATURES: Nylon construction INCLUDES: Two nylon shock cap (tops) Two nylon shock cap...

These are the Blue Aluminum Shock Caps from Traxxas. FEATURES: Aluminum construction Anodized blue in color Fits all Ultra Shocks INCLUDES: Four Shock Caps REQUIRES: Installation on the shocks

This is the Heavy Duty Driveshaft Assembly for the Slash 4x4 from Traxxas FEATURES: Black plastic and steel construction INCLUDES: Rear driveshaft assembly Screw pin REQUIRES: Installation on...

Body, Rustler, ProGraphix (replacement for the painted body. Graphics are printed, requires paint & final color application)/window, lights, decal sheet/wing & aluminum hardware FEATURES:...

These are the Differential Output Yokes for the Traxxas Bandit, Stampede and Rustler VXL. FEATURES: Black plastic construction INCLUDES: Two differntial output yokes Two 3x5mm countersunk screws...

This is a set of optional 30 Degree Blue Caster Blocks for the Traxxas Rustler and Stampede. FEATURES: Anodized aluminum construction Blue in color 30 degree INCLUDES: One left and right 30 degree...

These are the Suspension Screws Pins for the Traxxas Rustler, Stampede and Bandit. The hinge pins hold the suspension arms to the bulkheads FEATURES: Durable steel construction INCLUDES: Two 48mm...

Key Features 1/18 LaTrax Teton ProGraphix® multi-colored painted body Powered by Traxxas for award-winning performance and support All-weather electronics, including the waterproof...

This is the 7.2V NiMH 1200mAh Power Series 1 Battery Pack from Traxxas. FEATURES: Used in the 1/16 scale Traxxas Slash and E-Revo VXL Stick configuration New high current connector with gold-plated...

Overview The ultimate upgrade! The key to the Velineon's extreme power output is total system optimization. All of the components are carefully engineered to work seamlessly together. From the...

This is the TQ 2.4GHz 3-Channel Micro Receiver for use with the Traxxas TQ 2.4GHz Transmitter. FEATURES: Compatible with the Traxxas 3-channel #6517 transmitter and the older 2-ch #2238 TQ 2.4GHz...

High-grip Anaconda 2.2" performance street tires provide incredible tread life and traction and come pre-glued to popular Tracer 2.2" Mirror-Chrome wheels.

This is the clear Body for use with the Traxxas Jato stadium truck. FEATURES: Pre-cut clear lexan body with protective film covering Pre drilled body post holes INCLUDES: One replacement clear body...

Features Complete kit, no additional parts required Lowers chassis over one inch (1.3 in/33mm) Battery positioned 45% lower compared to standard chassis Low-CG enhances handling and increases...

This is the Traxxas 7-Cell 8.4V 3000mAh iD Power Cell NiMH Stick Battery Pack FEATURES: New high current connector with gold-plated copper terminals iD Auto Battery Identification allows Traxxas iD...

These are the Rear Shock Springs for the 2WD Traxxas Slash. FEATURES: Metal construction White in color INCLUDES: Two Shock Springs REQUIRES: Installation on the Traxxas Slash SPECS: Length,...

These are the Front Shock Springs for the 2WD Traxxas Slash. FEATURES: Metal construction, prgressive rate White in color INCLUDES: Two Front Shock Springs REQUIRES: Installation on the Traxxas...

This is the Traxxas AC to DC Power Supply Adapter. FEATURES: Designed specifically for use with the Traxxas peak detecting DC 2-4A fast chargers and allows them to be powered from a standard 110V AC...

This is the replacement Fuel Tank Cap O-Rings for the Traxxas Revo model. FEATURES: Rubber construction, orange in color INCLUDES: Two rubber o-rings REQUIRES: Installing onto the fuel tank...

These are the Countersunk 4mm x 10mm Screws for the Traxxas Nitro Jato Stadium Truck. FEATURES: Metal construction Black in color INCLUDES: Six 4mm x 10mm Countersunk Flathead Hex Screws REQUIRES:...

These are replacement stub axle pins for the Nitro Buggy, Nitro Street, TRX-3, Rad 2, TRX-1, Hawk 2, and Blue Eagle LS II. These pins slide through the axle and hold the wheel to the axle. INCLUDES:...

These are the Rear Stub Axles for the Traxxas Bandit, Stampede and Rustler. FEATURES: Metal construction, black and silver in color INCLUDES: Two rear stub axles and pins SPECS: Length: 1.65"...

This is a set of telescoping drive shafts for the Blue Eagle LS II. Includes: 2 white nylon telescoping shaft (each shaft is made of two pieces) 4 aluminum U-joints

These are the Shoulder Screws for the Traxxas T-Maxx 3.3. FEATURES: Black steel construction INCLUDES: Six steel shoulder screws SPECS: Length: 12mm Diameter: 3mm

Overview Traxxas progressive-rate springs are custom-wound to provide responsive control for small bumps, with a progressively stiffer rate to absorb harder impacts. Spring rates are identical to...