TLR

Features Made of AluminumStrong aluminum that enhances durability Overview Direct fit aluminum parts from Team Losi Racing.

Features Converts the 22 3.0 into a highly tuned buggy for carpet, Astro turf, and higher traction dirt surfacesSpecific chassis for high traction with minimum pocketing for reduced flexTransmission...

This is Team Losi Racing 22 Aluminum Driveshaft Set (TLR332002)

Team Losi Racing 22 3.0 22 3.0 50mm HD Turnbuckle Set. These are the replacement 22 3.0 50mm turnbuckles, but are also compatible with the 22-4 1/10 4wd buggy. Package includes two turnbuckles and...

Team Losi Racing 3/32x3/16x3/32" Sealed Ball Bearings. These tiny bearings are used in the throttle linkage assembly.

Team Losi Racing 16mm Front Shock Spring Set, and is intended for use with the Losi 8IGHT 3.0 1/8 buggy. These are the stock green - 4.8 rate springs included in the kit.

Team Losi Racing Front Shock Spring Set, intended for use with the Team Losi Racing 22 1/10 buggy. These are 4.1 Rate/Black springs.

Team Losi Racing 8IGHT 4.0 Chassis. This is the standard replacement 4mm chassis and is machined from 7075 aluminum and hard anodized.

Team Losi Racing 0° & 4° Center Differential Locator Set, used to mount the center diff straight and inline in the chassis with the 0° plate, or at a slight angle with the 4°...

The factory trimmed Team Losi Racing 8IGHT-E 4.0 Cab Forward Clear Body . Package includes body, window mask and decal sheet.

Team Losi Racing Battery Foam Set (6): 8IGHT-E 4.0

Replacement stock Body/Wing, Clear, w/Stickers: 22 3.0

Team Losi Racing 8IGHT 4.0 Cab Forward Clear Body. This body comes fully trimmed out but required polycarbonate paint. One window mask sheet is included.

FeaturesEasy to UseEliminates O-ring swellOverviewThese seals eliminate the inner o-ring that inserts into the shock cap. Instead this new o-ring goes on the outside of the shock top providing a seal...

8IGHT 4.0 Front Spindle Set. These are the standard replacement adjustable front spindles that allow you to tune dog bone plunge by using the included washers to adjust the spindle height. Package ...

8IGHT 4.0 Fuel Tank. This is the standard replacement fuel tank. Tank includes factory installed pull tab, fuel line and "L" nipple.

8IGHT 4.0 Side Guard Set. These are the standard replacement side guards and feature indentations for the included Velcro body strips.

8IGHT 4.0 Front Chassis Brace. This is the standard replacement plastic front chassis brace.

8IGHT 4.0 Rear Hub Set. These are the standard replacement rear hubs that use 8x16x5mm bearings (not included). Package includes right and left side hubs.

Team Losi Racing Front Shock Spring Set, intended for use with the Team Losi Racing 22 1/10 buggy. These are 3.8 Rate/Blue springs.

8IGHT 4.0 4 x 21mm TiCN Hinge Pins. These are the standard replacement TiCN pins. The TiCN (Ti-Carbonitride) coating has proven to be a very smooth and even more reliable than Ti-Nitride. These are...

8IGHT 4.0 Sticker Sheet. Includes various 8IGHT decals, as well as wing end plate decals, in white and yellow.

8IGHT 4.0 Brake Linkage Hardware. This is the standard replacement brake linkage hardware. Package includes the bearing supported throttle actuator (bearings not included), the brace that prevents...

8IGHT 4.0Ackerman Shoulder Screws. Package includes two replacement ackerman shoulder screws.

8IGHT 4.0 Axle Boot Set. These are the standard replacement axle boots. Package includes four axle boots and boot retainer rings, as well as two center driveshaft coupler boots. These are used to...

8IGHT 4.0 Aluminum 16mm Bleeder Shock Caps. These are the standard replacement shock caps. These bleeder shock caps and internal seals allow for easier shock rebuilds while using an emulsion shock...

8IGHT 4.0 Engine Mount Set. This is the standard replacement engine mount and has been designed with a larger footprint that substantially reduces chassis flex and fatigue underneath the engine...

8IGHT 4.0 Aluminum Rear Shock Tower. This is the standard replacement shock tower. This shock tower features updated link and shock mounting holes.

8IGHT 4.0 Aluminum Front Shock Tower. This is the standard replacement shock tower. This shock tower features updated link and shock mounting holes.

8IGHT 4.0 Pinion Bearing Spacer. These are the standard replacement spacers and are used in between the front/rear gearbox pinion bearings to prevent the bearings from binding when you attach the...