TLR

Team Losi Racing Clear Truggy Body Set for the 8IGHT-T 4.0 Nitro Truggy. This is the body that comes standard with the 4.0, but it is also compatible with the 3.0 with some slight trimming in the...

FeaturesDesigned to reduce rotating mass and improve acceleration for 22 2wd buggies.Precision machined for 7075-T6 aluminum and hard anodized.Only works with 22 SR composite outdrive diff set. Will...

Overview The all new adjustable front spindle gives racers the ability to tune Ackermann, trail, and roll center without the need to purchase additional parts of spindles. Trail can be adjusted to...

Note - requires aluminum plate from TLR234075, only serves as a replacement for the composite portion of the hub carrier.

Team Losi Racing 22-4 2.0 Rear Wing Stay & Washers. Package includes replacement rear wing mount, shim plate and washers.

Features The 50g brass pivot adds a substantial amount of weight directly over the front axlesPrecision CNC machined from heavy air-craft grade BrassLaser Etched with clear markings of degree angle...

TTeam Losi Racing 22 3.0 Front Hinge & King Pin Set. These are the replacement 22 3.0 front hinge pins and king pins, but are compatible with the entire 22 series of 1/10 2wd vehicles. Package...

Team Losi Racing 22-4 2.0 Battery Mount Set. Package includes replacement battery straps and hardware.

22T 3.0 MM Race Kit: 1/10 2WD Stadium Truck The 22T 3.0 is optimized for today's tracks with updated suspension geometry, an all-new rear end, and a 3-gear transmission that maximizes rear grip. And...

Features Tuning Option - The universal joint assembly allows for reduced rear driveshaft lock-up during acceleration which improves side bite and bump handlingPre-Assembled - The UJ Driveshafts come...

Team Losi Racing 48.7mm G3 3.5 TiCN Shock Shaft. Package includes one 3.5mm diameter rear shock shaft.   

This is an 8cc tube of Team Losi Racing SmartDiff Grease. This grease is used with the optional Losi SmartDiffs.   

This is a TLR SCTE TiCn Rear Shock Shaft Set. The improved titanium carbon-nitride coating provides an incredibly hard and tough surface that lasts longer, with higher abrasion resistance and a lower...

This is a replacemet 12mm hex for the TLR 22sct 3.0.

This is an optional Team Losi Racing 22 3.0 Aluminum HRC Rear Toe Plate. This plate allows you to achieve two degrees less rear toe than the standard plate, regardless of which toe insert you use,...

Features Heavy Duty Larger Adjustment Window Overview The all new Heavy Duty (HD) Slipper Spring is considerable stiffer with fewer working coils. This provides a much larger window for the proper...

This is a replacement Team Losi Racing 22SCT 3.0 Front Arm Set. These directional arms are labeled L or R, and are also labeled "3.0" indicating compatibility. 

Team Losi Racing 22 3.0 Aluminum LRC Rear Pivot Block Set. These are the replacement LRC Rear Pivot Blocks. Package includes rear/front and rear/rear pivot blocks and toe in chart.

This is a replacement Team Losi Racing 22 3.0 SPEC-Racer Composite Outdrive Set.  Note: only fits SR aluminum diff hubs and SR aluminum driveshafts. Will not fit standard 22 steel...

Features Designed to reduce rotating mass and improve acceleration for 22 2wd buggies. Driveshaft bones are Precision machined for 7075-T6 aluminum and hard anodized. The steel axles are machined to...

FEATURES: Open End Design OVERVIEW: Racers asked - TLR engineers listened! The all new open ended ball cup set allows all 22 races with HD turnbuckles the ability to remove and adjust their ball...

FEATURES: Molded Composite Aluminum Plate OVERVIEW: All new aluminum plate rear hub. The hub base is molded composite, allowing a press bearing fit without play and minimal unspring weight...

This is a replacement Team Losi Racing 22-4 Drive & Differential Pulley Set. Package includes the slipper assembly and jack shaft pulley's, as well as the front and rear differential pulley's...

This is the Team Losi Racing 22 3.0 Laydown Chassis that comes included with the Dirt Laydown Transmission Conversion Kit (TLR338005). The stock chassis for the 22 3.0 is TLR231036. The stock...

Team Losi Racing 8IGHT-E 4.0 Chassis. This is the replacement 8IGHT-E 4.0 chassis. Package includes chassis and self stick foam battery pads. 

Twelve replacement Team Losi Racing 4mm Turnbuckle Rod Ends, and are intended for use with the Team Losi Racing 22SCT 1/10 scale short course truck. 

The 22 3.0 SPEC-Racer kit gives you everything you need to build a race-winning, spec-class buggy that comes in under 1499 grams without sacrificing any of the 22 platform’s legendary...

Team Losi Racing 22-4 Aluminum Servo Horn (23T-JR/Airtronics/KO)    

Team Losi Racing 22-4 2.0 Complete Front/Rear Gear Differential. Package includes the parts needed to build one differential that can be used in the front or rear position.