TLR

Team Losi Racing Front Bumper: 22    Compatibility: Losi 22 1.0 Losi 22 2.0 Losi 22 3.0 Losi 22 3.0SPEC-Racer Losi 22 4.0 Losi...

...

Beach RC says... Losi 22 0° Caster Block Set.  

...

BeachRC says this is...  Team Losi Racing G3 Thin Machined Shock Piston (2) (2x1.7mm)          

This is a set of two Team Losi Racing 2x1.5mm G3 Thin Machined Shock Pistons, intended for use with TLR 22 5.0 Elite kits.                

This is a Team Losi Racing 22 5.0 carbon wing washer set.

This is a pack of two Team Losi Racing 2WD Gear Differential Outdrives. These outdrives are compatible with all 22 vehicles equipped with the gear differential.  

This is an optional Team Losi Racing Aluminum Spindle Insert Set, for use with all 22 vehicles. These inserts feature either 2mm or 4mm trail, depending on their orientation.

Team Losi Racing Silicone Shock Oil (27.5wt) (4oz)

Team Losi Racing 22 3.0 Aluminum LRC Rear Toe Plate. This is the optional -2° rear toe plate. Package includes toe plate and rear pivot toe in chart sticker.  

FeaturesMarked with an "S" inside of the wheel12mm hex mountingFits all 22 buggies with 12mm hexes OverviewUsing the same design as the standard TLR wheels, the Stiffezel front wheels have been...

FeaturesMarked with an "S" inside of the wheel12mm hex mountingFits all 22 buggies with 12mm hexes OverviewUsing the same design as the standard TLR wheels, the Stiffezel front wheels have been...

This is an optional Team Losi Racing Brass Weight Hinge Pin Brace for the 22 3.0 buggy. This brace adds 30 grams of extra weight to the vehicle. 

FeaturesDesigned to reduce rotating mass and improve acceleration for 22 2wd buggies.Precision machined for 7075-T6 aluminum and hard anodized.Only works with 22 SR composite outdrive diff set. Will...

Overview The all new adjustable front spindle gives racers the ability to tune Ackermann, trail, and roll center without the need to purchase additional parts of spindles. Trail can be adjusted to...

Note - requires aluminum plate from TLR234075, only serves as a replacement for the composite portion of the hub carrier.

Team Losi Racing 22-4 2.0 Rear Wing Stay & Washers. Package includes replacement rear wing mount, shim plate and washers.

Features The 50g brass pivot adds a substantial amount of weight directly over the front axlesPrecision CNC machined from heavy air-craft grade BrassLaser Etched with clear markings of degree angle...

TTeam Losi Racing 22 3.0 Front Hinge & King Pin Set. These are the replacement 22 3.0 front hinge pins and king pins, but are compatible with the entire 22 series of 1/10 2wd vehicles. Package...

This is an optional Team Losi Racing 22 3.0 Aluminum HRC Rear Toe Plate. This plate allows you to achieve two degrees less rear toe than the standard plate, regardless of which toe insert you use,...

Features Heavy Duty Larger Adjustment Window Overview The all new Heavy Duty (HD) Slipper Spring is considerable stiffer with fewer working coils. This provides a much larger window for the proper...

Team Losi Racing 22 3.0 Aluminum LRC Rear Pivot Block Set. These are the replacement LRC Rear Pivot Blocks. Package includes rear/front and rear/rear pivot blocks and toe in chart.

This is a replacement Team Losi Racing 22 3.0 SPEC-Racer Composite Outdrive Set.  Note: only fits SR aluminum diff hubs and SR aluminum driveshafts. Will not fit standard 22 steel...

Features Designed to reduce rotating mass and improve acceleration for 22 2wd buggies. Driveshaft bones are Precision machined for 7075-T6 aluminum and hard anodized. The steel axles are machined to...

FEATURES: Open End Design OVERVIEW: Racers asked - TLR engineers listened! The all new open ended ball cup set allows all 22 races with HD turnbuckles the ability to remove and adjust their ball...

FEATURES: Molded Composite Aluminum Plate OVERVIEW: All new aluminum plate rear hub. The hub base is molded composite, allowing a press bearing fit without play and minimal unspring weight...

This is the Team Losi Racing 22 3.0 Laydown Chassis that comes included with the Dirt Laydown Transmission Conversion Kit (TLR338005). The stock chassis for the 22 3.0 is TLR231036. The stock...

Twelve replacement Team Losi Racing 4mm Turnbuckle Rod Ends, and are intended for use with the Team Losi Racing 22SCT 1/10 scale short course truck. 

Optional Team Losi Racing Rear Hub Carrier with plastic hexes. These hubs are compatible with the 22 series of 2WD 1/10 scale vehicles, as well as the 22-4 2.0 4WD buggy