TLR

The factory trimmed Team Losi Racing 8IGHT-E 4.0 Cab Forward Clear Body . Package includes body, window mask and decal sheet.

Team Losi Racing Battery Foam Set (6): 8IGHT-E 4.0

Replacement stock Body/Wing, Clear, w/Stickers: 22 3.0

Team Losi Racing 8IGHT 4.0 Cab Forward Clear Body. This body comes fully trimmed out but required polycarbonate paint. One window mask sheet is included.

FeaturesEasy to UseEliminates O-ring swellOverviewThese seals eliminate the inner o-ring that inserts into the shock cap. Instead this new o-ring goes on the outside of the shock top providing a seal...

8IGHT 4.0 Front Spindle Set. These are the standard replacement adjustable front spindles that allow you to tune dog bone plunge by using the included washers to adjust the spindle height. Package ...

8IGHT 4.0 Fuel Tank. This is the standard replacement fuel tank. Tank includes factory installed pull tab, fuel line and "L" nipple.

8IGHT 4.0 Side Guard Set. These are the standard replacement side guards and feature indentations for the included Velcro body strips.

8IGHT 4.0 Front Chassis Brace. This is the standard replacement plastic front chassis brace.

8IGHT 4.0 Rear Hub Set. These are the standard replacement rear hubs that use 8x16x5mm bearings (not included). Package includes right and left side hubs.

Team Losi Racing Front Shock Spring Set, intended for use with the Team Losi Racing 22 1/10 buggy. These are 3.8 Rate/Blue springs.

8IGHT 4.0 4 x 21mm TiCN Hinge Pins. These are the standard replacement TiCN pins. The TiCN (Ti-Carbonitride) coating has proven to be a very smooth and even more reliable than Ti-Nitride. These are...

8IGHT 4.0 Sticker Sheet. Includes various 8IGHT decals, as well as wing end plate decals, in white and yellow.

8IGHT 4.0 Brake Linkage Hardware. This is the standard replacement brake linkage hardware. Package includes the bearing supported throttle actuator (bearings not included), the brace that prevents...

8IGHT 4.0Ackerman Shoulder Screws. Package includes two replacement ackerman shoulder screws.

8IGHT 4.0 Axle Boot Set. These are the standard replacement axle boots. Package includes four axle boots and boot retainer rings, as well as two center driveshaft coupler boots. These are used to...

8IGHT 4.0 Aluminum 16mm Bleeder Shock Caps. These are the standard replacement shock caps. These bleeder shock caps and internal seals allow for easier shock rebuilds while using an emulsion shock...

8IGHT 4.0 Engine Mount Set. This is the standard replacement engine mount and has been designed with a larger footprint that substantially reduces chassis flex and fatigue underneath the engine...

8IGHT 4.0 Aluminum Rear Shock Tower. This is the standard replacement shock tower. This shock tower features updated link and shock mounting holes.

8IGHT 4.0 Aluminum Front Shock Tower. This is the standard replacement shock tower. This shock tower features updated link and shock mounting holes.

8IGHT 4.0 Pinion Bearing Spacer. These are the standard replacement spacers and are used in between the front/rear gearbox pinion bearings to prevent the bearings from binding when you attach the...

8IGHT 4.0 Shock Stand-Off. These are the standard replacement shock standoffs. Package includes four standoffs.

8IGHT 4.0 Front Center Dogbone. This is the standard replacement 95.5mm dog bone.

Replacement Team Losi Racing 8IGHT 4.0 LRC Adjustable Rear Hinge Pin Brace Set, with included inserts.

8IGHT 4.0 15 Degree Front Spindle Carrier Set. These are the standard replacement 15ë spindle carriers. Package includes right and left side spindle carriers, as well as four spindle hinge pin...

Team Losi Racing Front Shock Spring Set, intended for use with the Team Losi Racing 22 1/10 buggy. These are 3.5 Rate/Green springs.

Team Losi Racing Front Shock Spring Set, intended for use with the Team Losi Racing 22 1/10 buggy. These are 2.5 Rate/Red springs.

Team Losi Racing Front Shock Spring Set, intended for use with the Team Losi Racing 22 1/10 buggy. These are 2.9 Rate/Orange springs.

Team Losi Racing Front Shock Spring Set, intended for use with the Team Losi Racing 22 1/10 buggy. These are 3.2 Rate/Silver springs.

Team Losi Racing Rear Shock Spring Set, intended for use with the Team Losi Racing 22 1/10 buggy and stadium trucks. These are 3.4 Rate/Silver springs.