TEKNO

This is an optional Tekno RC EB410 Carbon Fiber Steering Top Plate.   

This is a replacement Tekno RC 2S Battery Strap Set. These straps are ‘cinch’ straps and wrap around on themselves for superior holding power and durability without relying on grommets or...

TKRBB06103 – Ball Bearings (6x10x3, 4pcs) EB48 and SCT410 bearings for the steering posts. 4pcs required in kit.

This is an optional Tekno RC 2.4mm Rear Sway Bar. This sway bar is compatible with the ET48 and NT48 1/8 scale trucks, and is two steps softer than the sway bar included in the kit.

TKR5053A – Pivot Balls (6.8mm, flanged, outside camber, aluminum, 4pcs)

This is a replacement Tekno RC ESC Tray O-Ring Set, and is intended for use with the Tekno R/C EB48 electric 1/8 buggy. These are the o-rings that are glued to the underside of the TKR5065 ESC tray...

TKR5230 – Steering Linkage (M3x18mm threaded rod, 10pcs)

Tekno RC EB410 CNC Delrin Shock Cartridge Bushing. This is a replacement for the Tekno EB410 4wd buggy. Package includes four shock cartridge bushings.   

Tekno RC EB410 Kingpin Shoulder Screws. This is a replacement for the Tekno EB410 4wd buggy. Package includes four kingpin screws.   

Tekno EB410 Aluminum Servo Horn. This low profile clamping style 25T horn uses M3 clamp screws and is a must have EB410 upgrade.   

Tekno RC EB410 Shock/Cartridge Cap & Bushing Set. This is a replacement for the Tekno EB410 4wd buggy. Package includes four upper shock caps, four lower shock caps, four shock cap bushings and...

Tekno RC Battery Strap Thumb Screw. This is a replacement for the Tekno EB410 4wd buggy. Package includes one thumb screw that can be used with both the stock composite and optional carbon battery...

Tekno RC 7mm Serrated Wheel Nuts. This is a replacement for the Tekno EB410 4wd buggy. Package includes four wheel nuts.   

Tekno RC EB410 Lightened Differential Outdrives. This is a replacement for the Tekno EB410 4wd buggy and is used in the front, center and rear differential. Package includes two outdrives and two...

This is an optional Tekno RC 12mm Aluminum M6 Driveshaft Hex Adapter Set. These aluminum 12mm hex adapters are intended for use with the Tekno RC M6 6mm Driveshaft kits. They fit all 12mm hex SC...

Tekno RC EB410 Emulsion O-ring Set. This is a replacement for the Tekno EB410 4wd buggy. Package includes four large shock cap o-rings and eight small bleeder screw o-rings.   

Tekno RC EB410 Rear Shock Shafts. This is a replacement for the Tekno EB410 4wd buggy. Package includes two shock shafts.   

Tekno RC EB410 Front Shock Shafts. This is a replacement for the Tekno EB410 4wd buggy. Package includes two front shock shafts.    

Tekno RC EB410 Shock Standoffs. This is a replacement for the Tekno EB410 4wd buggy. Package includes two shock standoffs that can be used in the front or rear position.   

Tekno RC EB410 Aluminum Center Front Tapered Driveshaft. This is a replacement for the Tekno EB410 4wd buggy. Package includes one center/front driveshaft.   

TKR6572 – Driveshafts (rear, hardened steel, 2pcs)

TKR6574 – Driveshafts (front, hardened steel, 2pcs)

Tekno RC EB410 Body. This is a replacement for the Tekno EB410 4wd buggy. Package includes one clear body with factory applied overspray film.   

TKR6610 – Sway Bar Set (rear, 1.5, 1.6, 1.7, 1.8, 1.9mm, EB410)

TKR6503C – Battery Strap (carbon fiber, EB410) This is the carbon fiber light weight option battery strap for the EB410. It is stronger than the plastic stock counterpart while shaving off...

TKR6796 – Shock Spring Set (rear, 1.2×7.75, 2.82lb/in, 53mm, orange)        

TKR6787 – Shock Spring Set (front, 1.3×7.75, 3.85lb/in, 45mm, red)    

TKR6786 – Shock Spring Set (front, 1.3×8.13, 3.62lb/in, 45mm, orange)    

TKR6797 – Shock Spring Set (rear, 1.2×7.38, 3.02lb/in, 53mm, red)    

TKR6517 – Differential Shims (5x14mm, hardened, 6pcs, EB410)