TEKNO

TKR9149B – Differential Cross Pins (2.x, for 2-gear diff, 3pcs) Vehicle CompatibilityTKR9149B - Differential Cross Pins (2.x, for 2-gear diff, 3pcs) is not included with any kit.This can be...

TKR8777 – Shock Standoffs (revised, +0mm, all 2.x, requires TKR1443, 2pcs.) Keep your Tekno RC vehicles running at peak performance with our new shock standoffs. Instead of the previously used...

TKR6626 – Spindle Carriers (9°, LRC, L/R, EB410.2) Get more steering from your EB410.2 with Tekno RC’s new 9° spindle carriers. Intended to be used on carpet, astro turf or high...

TKR9286B – Suspension Arms (front, requires TKR9055/C sleeves, EB/NB48 2.2) Vehicle Compatibility TKR9286B - Suspension Arms (front, requires TKR9055/C sleeves, EB/NB48 2.2) is included...

TKR9310B – Split Center Diff Mount (NB48 2.1) NB48 2.0 and NT48 2.0 Compatibility This center differential mount is compatible with the NB48 2.0 and NT48 2.0 if the small nubs on the bottom...

With these new springs, you can improve the consistency and corner speed of your 2.0 Buggy! Our team drivers discovered that these springs boosted corner speed and provided more consistent jump...

Product Description TKR9065 – Servo Mount, ESC tray, RX Box (EB/ET48 2.0) Vehicle Compatibility TKR9065 - Servo Mount, ESC tray, RX Box (EB/ET48 2.0) is included with the EB48 2...

This is an optional Tekno RC Aluminum 17mm Lightened Hex Wheel Hub Set with a +2mm offset, and is intended for use with the Tekno RC EB48 1/8 Buggy. The Tekno RC offset wheel hubs for the EB48 will...

Product DescriptionTKR6083 – Shock Spring Set (rear, 1.6×9.0T, 90mm, orange) Vehicle Compatibility TKR6083 - Shock Spring Set (rear, 1.6x9.0T, 90mm, orange, 4.80 lb/in) is not...

Keep rotating mass to a minimum using the Tekno RC Lightened Steel Spur Gear. Package includes one spur gear. Compatible Models: NB48: NB48 2.0* NB48 2.1 NT48: NT48 2...

Keep rotating mass to a minimum using the Tekno RC Lightened Steel Spur Gear. Package includes one spur gear. Compatible Models: NB48: NB48 2.0* NB48 2.1 NT48: NT48 2...

This revised body for the NB48 2.0 maintains the original body’s distinctive design elements and style while slightly increasing the cab width. The modification adds extra internal room to...

Vehicle Compatibility TKR6574B - Driveshaft (front, hardened steel, EB410.2, 2pcs) is included with the EB410.2 kit and can be used as a replacement part for that vehicle. This item is...

By lowering the hinge pin location compared to the stock rear hubs (TKR5199), we have raised the rear roll center in just the right place. Use these hubs to increase on power traction and stability...

The Tekno RC EB/NB/ET/NT48 Spindle Arms are to be used in combination with the Tekno Adjustable Ackermann Spindles (TKR9041X - sold separately). Package includes two spindle arms.Using this...

Tekno RC NT48 2.0 Mudguard Adapters. These replacement mudguard adapters are intended for the Tekno NT48 2.0. Package includes four adapters.    

Tekno RC NT48 2.0/ET48 2.0 "D Block" Aluminum Hinge Pin Brace. Package includes replacement d-block.   

Tekno NT48 2.0/ET48 2.0 Front Sway Bar Set. This tuning option includes 1.6, 1.7, 1.8, 1.9 and 2.0mm diameter front sway bars.

Tekno NT48 2.0/ET48 2.0 Front Sway Bar Set. This tuning option includes 2.6, 2.7, 2.8, 2.9 and 3.0mm diameter front sway bars.  

Tekno NT48 2.0/ET48 2.0 Rear Sway Bar Set. This tuning option includes 2.1, 2.2, 2.3, 2.4 and 2.5mm diameter rear sway bars. 

Tekno NT48 2.0/ET48 2.0 Front/Rear Driveshafts. Package includes two replacement driveshaft dog bones that can be used in the front or rear position. 

Tekno RC NT48 2.0/ET48 2.0 Aluminum Front Shock Tower. Package includes one replacement shock tower.   

Tekno ET48 2.0 Aluminum 2.0 15° Spindle Carriers. Package includes replacement right and left side spindle carriers.   

Tekno RC NT48 2.0/ET48 2.0 Differential Ring Gear. Package includes replacement ring gear that must be used with the TKR9453 pinion gear.   

Tekno RC NT48 2.0/ET48 2.0 Differential Pinion Gear. Package includes replacement pinion gear that must be used with the TKR9452 ring gear.   

Tekno RC NT48 2.0/ET48 2.0 Aluminum Rear Shock Tower. Package includes one replacement shock tower.   

Tekno NT48 2.0/ET48 2.0 Front Sway Bar Set. This tuning option includes 2.1, 2.2, 2.3, 2.4 and 2.5mm diameter front sway bars.   

This is an optional Tekno RC Aluminum 17mm Lightened Hex Wheel Hub Set with a +3mm offset, and is intended for use with the Tekno RC EB48 1/8 Buggy. The Tekno RC offset wheel hubs for the EB48 will...

Tekno RC ET48 2.0 5x95mm Turnbuckle. Package includes two optional turnbuckles, used when running shorter front camber link positions.  

Tekno RC ET48 2.0 5x108mm Turnbuckle. Package includes two replacement turnbuckles.