TEAM ASSOCIATED

This is the drive belt for the Associated SC10 4X4 Truck. FEATURES: One replacement drive belt REQUIRES: Installation into the SC10 4X4 SPECS: Length: 12"Width: 13/64"

This is the Inner Slipper Hub for the Team Associated SC10 4x4. FEATURES: Aluminum construction INCLUDES: Inner Slipper Hub with Spacer REQUIRES: Installing in slipper clutch assembly

This is the Slipper Hardware for the Associated SC10 4x4. FEATURES: Steel constructionMaintains proper tension and spacing of slipper assembly INCLUDES: Spring and Spacers REQUIRES: Installing on...

This is the Belt Cover Set for the SC10 4X4 Kit from Team Associated. FEATURES: Black plastic construction INCLUDES: Complete belt cover set REQUIRES: Installation on vehicle

This is the Receiver Box for the Associated SC10 4x4 Truck. FEATURES: Plastic construction INCLUDES: Top and bottom Receiver Box SectionsSeals, ASCC1087Two 3x8mm Socket Head Cap Screws,...

This is the Nerf Bar for the SC10 4X4 Kit from Team Associated. FEATURES: Black plastic construction INCLUDES: Nerf Bar Set REQUIRES: Installation on chassis

These are the Spring Cups and Collars for the Associated SC10 4x4 Truck. FEATURES: Plastic constructionCups hold spring and piston assembly in placeCollars thread onto shock body to adjust and...

These are the 13mm 4x1.3mm Shock Pistons for the Associated SC10 4x4. FEATURES: Plastic constructionFour 1.3mm diameter holes control rate of oil flow through shock body1.3mm diameter holes are...

These are the 13mm 4x1.2mm Shock Pistons for the Associated SC10 4x4. FEATURES: Plastic constructionFour 1.2mm diameter holes control rate of oil flow through shock body1.2mm diameter holes are...

These are the 13mm 4x1.1mm Shock Pistons for the Associated SC10 4x4. FEATURES: Plastic constructionFour 1.1mm diameter holes control rate of oil flow through shock body1.1mm diameter holes are...

These are the 13mm Molded Shock Caps for the Associated SC10 4x4. FEATURES: Nylon constructionSilicone bladder seals with attachment screws INCLUDES: Four 13mm Molded Shock CapsFour Shock Bladder...

Team Associated 13mm Rear Shock Body Set, and is intended for use with the Associated SC10 4x4. This package includes two 13x30mm shock bodies and two pre-load collars.

These are the Front Shock Bodies for the Associated SC10 4x4. FEATURES: Aluminum construction, anodized blue in color INCLUDES: Two 13mm 2.8lb Rear Shock SpringsTwo Spring Collars REQUIRES:...

This is a replacement Team Associated 13mm Shock Piston Hardware Set, and is intended for use with the Associated SC10 4x4

This is a replacement Team Associated 30mm Rear Shock Shaft Set, and is intended for use with the Associated SC10 4x4

These are the Front 13mm Shock Shafts for the Associated SC10 4x4. FEATURES: Steel constructionThreads into shock cartridge and holds shock piston in place INCLUDES: Two Front 13mm Shock ShaftsFour...

These are the 13mm Shock Rod Ends for the Associated SC10 4x4 Truck. FEATURES: Plastic constructionSteel insertsHolds bottom of shock to shock tower INCLUDES: Four Shock Rod EndsFour Steel...

This is a package of Twelve Heavy Duty Ball Cups from Team Associated. FEATURES: Plastic constructionFor use on suspension linkage on Associated vehicles INCLUDES: 12 Heavy Duty Ball...

These are Team Associated HD M3x120mm Ballstuds. FEATURES: Increases durabilityCan be used on both on-road and off-road applications INCLUDES: Two M3x12mm HD Ballstuds REQUIRES: Installation onto...

This is the CVA Rebuild Kit for the Associated SC10 4x4 Truck. FEATURES: Steel constructionFastens the CVA Bones to the Axles at front and rear suspension INCLUDES: Two Inserts and two...

This is a pair CVA Pin Retainers for theAssociated SC10 4x4 Short Course Truck. FEATURES: Steel constructionHolds pin in place on the CVA axle INCLUDES: Two each Pin Retainers, Washers and...

Team Associated CVA Axle Set intended for use with the Associated SC10 4x4.

This is a pair of Front CVA Bones for theAssociated SC10 4x4 Short Course Truck. FEATURES: Steel construction INCLUDES: Two Front CVA Bones REQUIRES: Installing between front gearbox and wheels

These are 80mm Heavy Duty Turnbuckles from Team Associated. FEATURES: Steel constructionSilver in color INCLUDES: Two 80x3.5mm heavy duty turnbuckles REQUIRES: Installation on to vehicle

Team Associated Rear Hub Wheelbase Shim Set, and is intended for use with the Associated SC10 4x4. These shims are used to adjust the position of the rear hubs, altering the overall wheelbase of the...

These are the Inner Hinge Pins for the Associated SC10 4x4 Truck. FEATURES: Steel constructionHolds the inner part of front and rear suspension arms in place INCLUDES: Two 2.02" (51.5mm) Hinge...

Team Associated Rear Arm Mount "D" Set, and is intended for use with the Associated SC10 4x4.

These are the Rear Axle Crush Tubes for the Associated SC10 4x4. FEATURES: Aluminum construction INCLUDES: Two Rear Axle Crush Tubes REQUIRES: Installing between hub carrier and outer ball bearing