TEAM ASSOCIATED

This is a pack of two Team Associated 12mm Rear Shock Springs. These rear shock springs are 61mm long and are intended for 12mm Team Associated Big Bore Shocks. These springs are color coordinated...

This is a pack of 12mm Big Bore Team Associated Rear Shock Springs, rated at 2.0lbs. These springs are identified as Gray for easy identification, and are intended for use on the rear of the B6.1 and...

This is an optional Team Associated 72 Tooth, 48 Pitch Spur Gear for use with the B6.1/B6.1D 2WD Buggies.      

This is an optional Team Associated 69 Tooth, 48 Pitch Spur Gear for use with the B6.1/B6.1D 2WD Buggies.      

This is an optional Team Associated 81 Tooth, 48 Pitch Spur Gear for use with the B6.1/B6.1D 2WD Buggies.      

This is an optional Team Associated 78 Tooth, 48 Pitch Spur Gear for use with the B6.1/B6.1D 2WD Buggies.      

This is an optional Team Associated 75 Tooth, 48 Pitch Spur Gear for use with the B6.1/B6.1D 2WD Buggies.      

Team Associated B6.1 Top Plate & Ballstud Mount. This is the replacement top plate and ballstud mount for the B6.1 and B6.1D models. Package includes one top plate and one ballstud mount...

Team Associated B6.1/B6.1D Gear Cover. This is the replacement gear cover.     

Team Associated B6.1/B6.1D Differential Height Inserts. Package includes four diff inserts.   

Team Associated Slipper Pads V2. These are the replacement V2 type slipper pads. Package includes two slipper pads.   

Team Associated B6.1/B6.1D Gear Differential Case. Package includes diff case, cover and cross pins.  

These are the springs for the front of most on-road cars. Heavy and light springs are available depending on the track conditions. 2 per package.

This is a pack of two replacement ATD differential T-nuts from Team Associated. These are the nuts that the differential thrust bolt threads into.  

This is a replacement Team Associated 106mm Center Universal Driveshaft, intended for use with the RC8B3 Nitro Buggy. This driveshaft is assembled and ready for installation, but does not include a...

This is a replacement Team Associated 106mm Center Universal Driveshaft, intended for use with the RC8B3 Nitro Buggy. This driveshaft is assembled and ready for installation, but does not include a...

This is a pack of twenty replacement Team Associated 2.5mm Washers, and are intended for use with the Associated RC8 family of vehicles.  

This is a pack of two replacement Team Associated "Hard" 4-Shoe Composite Clutch Shoes.

This is a pack of four Team Associated Clutch Springs for use with the RC8B3.1 4-Shoe Clutch. The stock setup is two 0.90mm springs and two 0.95mm springs. 

This is a pack of four Team Associated Clutch Springs for use with the RC8B3.1 4-Shoe Clutch. The stock setup is two 0.90mm springs and two 0.95mm springs.   

This is a pack of four replacement Team Associated RC8B3.1 Turnbuckle Balls.    

This is a replacement Team Associated 4-Shoe Clutch Shoe Pin Set. Includes: (4) Clutch Shoe Pins, 4 Shoe Clutch(6) Washers, 5x8x0.2(4) Washers, 3x8mm, black(1) Screws, M3x0.5x8mm SHCS

This is a pack of four Team Associated Clutch Springs for use with the RC8B3.1 4-Shoe Clutch. The stock setup is two 0.90mm springs and two 0.95mm springs. 

This is a replacement Team Associated Vented 13 Tooth Clutch Bell for use with the 4-Shoe Clutch.   

This is a pack of two replacement Team Associated "Hard" 4-Shoe Aluminum Clutch Shoes.  

This is a replacement Team Associated 46 Tooth RC8B3.1 Spur Gear.   

This is a pack of four replacement Team Associated RC8B3.1 Shouldered Turnbuckle Balls.  

This is the Team Associated 4mm RC8B3 and RC8B3.1 Rod End Set, including two straight ends and two bent ends.   

This is the Team Associated 5mm RC8B3 Rod End Set, including two straight ends and two bent ends.   

Clutch Bell 14T, vented, 4 shoe