SCHELLE

B6.1 Nova Lockout Parts Set (spur gears not included) includes the Lockout 6.1 series drive hub (for buggy, truck, and SC) , 2-56 screws, and topshaft bolt adapter.  Get more power and...

67mm Offset Inner Bearing Inserts , 1 pair. These are offset to shift the inner 10x15mm bearing into the hub for use with 67mm conversion axles/bones. Outer bearing insert does not change (comes with...

Pair of black anodized CNC aluminum battery strap nuts with 5.5mm hex. Secure wide footprint, stealthy black anodize. Fits all B6 series, B6.1 series, T6.1, and SC6.1

B64 Extreme Tower features: 4.0 mm carbon fiber for stiffness and durability. Made in the USA.Front and Rear tower removed un-necessary outer holes for less leverage to break.Front tower has...

Shock pistons with split hole sizes achieve a new damping progression unlike a traditional piston.   For the case of the 3+1 pistons, the added +1 small 1mm hole gives the shock lighter...

Tuning Set of 8 pair fits screw-on type pistons that come on B6, B6D, B64, B64D. Also fits updated screw-on V2 shock shafts for use on B5, B5M, B5M Factory Lite, T5M, and SC5M. Precision CNC...

Shock pistons with split hole sizes achieve a new damping progression unlike a traditional piston.   For the case of the 3+1 pistons, the added +1 small 1mm hole gives the shock lighter...

Precision CNC machined V2 12mm 3 Hole Piston, 1.5mm, Bevel. Ideal for 4wd rear with 30 wt oil. Also great front and rear for B6 using 35 wt front and 30wt rear oils. These pistons have a 45 degree...

The B64 Carbon Gearbox Shims package come with 2 pcs. 1mm thickness carbon fiber shims.   These shims fit in between the B64 gearbox and chassis and raise the gearbox and suspension mounts up...

The B6 Strap X Plate adapts on top of the hugely popular Schelle SCH1257 B6 Carbon Battery Strap.  Using the same 4 attachment screws for the battery posts, the X brace creates a stable platform...

The B6 Chassis Tie Rod Set comes with all the hardware you will need to complete the dual pivot setup to go with the SCH1277 X Plate.  You can go the "Do It Yourself" route with spares from...

Upgrade your 22 3.0 buggy to make the rear camber block more durable, and easier to adjust.   The Schelle 2 piece design does away with the plastic inserts and over-sized design of the kit...

Contains 4 replacement plastic bearing inserts for Schelle B5 Aluminum Hubs. Also compatible with Team Associated FT rear hubs.

Schelle 3mm Black Aluminum Ballstud Washers are precision machined and anodized with a large diameter specifically for off-road use. These washers are intended for all-purpose use. Use them for...

Every racer will want to get a pack of the Schelle Shock Tower Plugs. The black rubber plugs fill the un-used 3mm holes in your front and rear shock towers so they don't fill up with dirt. ...

Replacement upper cap for both B6 and B5M Aluminum Rear Hubs.  Available in black anodize only.   The Schelle hubs use the same cap for both sides and fit B6, B6D, B5, B5M, B5M Factory...

Description Precision CNC machined 12mm 2 Hole Piston, 1.6mm, Flat. These pistons are sold 2 pcs per package and each pair comes with our Shock Piston Tunning Guide. The Tuning Guide explains the...

Description TLR Eight 3.0 Bearing Set, 28 pcs. Schelle Racing Innovations Onyx Series Ball Bearings are the recommended upgrade bearings for any racer looking for improved performance and longer...

Description With the rising popularity of serrated locking wheel nuts, Schelle has answered the call of racers everywhere by introducing a new tool for installing and removing serrated wheel nuts on...

Description Schelle Nova Driver Plates bag contains 3 drive plates to replace the parts that come in the SCH1300 to SCH1302 Nova Sets. These drive plates typically only need to be replaced 1 or 2...

Description Schelle Nova Spring and Washer Bag contains all the spare parts that come inside a Nova Slipper Clutch Set. Includes B5 topshaft adapter. Large aluminum shim is a spring spacer for the...