OFNA

Type a description for this product here...

This is the 13T Starter Box Motor for the Ofna Mini Starter Boxes OFNP1252 ...

This is the Ofna Force .32 cu in (5.2cc) Nitro Engine with Pull Starter and SG (pilot) Crankshaft. FEATURES: Unique pull start pin design allows conversion to non-pull start by purchasing different...

This is a 145cc Fuel Tank for the Onfa 9.5 Violator. FEATURES: Frosted clear Plastic construction INCLUDES: One 4.9oz (145cc) Fuel Tank for the Onfa 9.5 Violator REQUIRES: Assembly on vehicle...

This is a replacement OFNA Front Bumper Skid Plate Set, and is intended for use with the OFNA Jammin SCRT 10 truck.  

This is a pack of four replacement 7mm balls for OFNA buggies, and fits the Jammin X1 RTR and X1-CR buggies. These are the small balls used in the steering plastic ball ends to connect the steering...

This is a pack of eight replacement 7mm steering plastic ball ends for OFNA buggies, and fits the Jammin X1 RTR and X1-CR buggies. These are the plastic ball ends that connect the steering knuckles...

This is a replacement OFNA 8mm Rear Dogbone Axle Set, and is intended for use with the OFNA Ultra LX, Ultra GTP, and Dirt Pro Late Model.  

This is the Ofna Racing Rear Shock Tower for the Late Model. FEATURES: Aluminum construction Gray anodized INCLUDES: One rear shock tower REQUIRES: Installation following the instruction...

This is the Ofna Racing Front Shock Tower for the Late Model. FEATURES: Aluminum construction Gray anodized INCLUDES: One front shock tower REQUIRES: Installation following the instruction...

This is the OFNA Racing [30631] 6x13mm Ball Bearings (2). Fits OFNA: Oval Late Model Elect and more.

This is a pack of six replacement 6mm ball ends without collars for OFNA buggies, and fits the Jammin X1 RTR and X1-CR buggies.  

This is a replacement OFNA Front Upper/Lower Arm Holder Plate Set, and is intended for use with the OFNA Ultra LX, Ultra GTP, and Dirt Pro Late Model.  

This is the Ofna Shock Rebuild Stand in Yellow. FEATURES: Holds 1/10 and 1/8 scale shocks, constructed of plastic Upper and lower plates hold four top and four bottom sections of shock bodies for...

This is a set of 3 Clutch Shoe Springs. This is for use with the Ofna 9.5 RTR Off Road Buggy. ...

This is the Clutch Bell Shim Kit from Ofna. FEATURES: Shims for the Clutch Bell for the Ofna 12 and Ofna 21 Engines. INCLUDES: Spacers, washers, shims and allen head screws. SPECS: Various sizes...

These are Clutch Shoes by OFNA. FEATURES: Black composite plastic construction INCLUDES: Three Shoes REQUIRES: Three Shoe Flywheel and Clutch Bell

This is a Replacement Engine Mount Kit for the OFNA ULTRA GTP RTR vehicle. FEATURES:Aluminum construction mountsAll the hardware needed to install INCLUDES:Two engine mountsFour 5mm phillips head...

These are the stock Rear Dog Bones for the Ofna Jammin' CRT.5. The rear wheel hubs attach to these dog bones. FEATURES:Steel construction INCLUDES:Two Rear Dog Bones REQUIRES:Assembly at rear...

These are the Front Upper Arms for the Ofna MBX-4 Buggy. Located between the gearbox and the hub carriers. FEATURES: Black molded plastic A-arms INCLUDES: 1 right and 1 left arm on a parts...

This is the Ofna Jammin' 35mm 3 Pin Flywheel. FEATURES: Constructed of aluminum For 3-shoe clutches used on the Ofna Jammin' truggy and buggy series INCLUDES: Ofna Jammin' 35mm 3 Pin...

These are Replacement Center Shaft for the 9.5. FEATURES: Steel Dogbones INCLUDES: Two Dogbones REQUIRES: Ofna 9.5 SPECS: Length: 93 mm (3.66")End Diameter: 8 mm (0.315") COMMENTS: None

This is the replacement Front Lower Suspension Arms from Ofna. This works for the Ofna MBX4 kits. FEATURES: Black plastic suspension arms INCLUDES: One left and one right suspension...

This is a Set of Rear Uprights for the Ofna Blazer. The rear axles ride in these uprights. FEATURES: Black nylon construction Used with 8mm axles Six upper arm mounting positions...

This is a Pair of replacement Differential Shafts for Ofna 1/8 vehicles.These shafts connect to the differentials and the dogbones fit into these. FEATURES: Steel construction INCLUDES: Two...

This is a 18 Tooth Clutchbell for Nitro powered vehicles.This is the bell and gear which fits onto the end of the crankshaft. FEATURES: Hardened steel constructionBlack in colorVented...

This is the Ofna (OFN) #10270 Fuel Tube Line Clips.FEATURES: Made of black plasticHolds fuel tubing securely to keep it from moving aroundEach clip holds 2 pieces of tubing INCLUDES: 6 fuel tube...