MUGEN SEIKI

Mugen Seiki MBX8 Shock Cap Bushing. This is a replacement set of shock cap bushings intended for the Mugen MBX8 Nitro and E-Buggy.

Beach RC says... This is the new front and rear-center dogbones for the MBX8 and MBX8 Eco buggy.  The center dogbones will eliminate friction from the stock universal driveshafts...

Mugen Rear Shock Boots, and are intended for use with the Mugen MBX7 1/8 scale nitro buggy.

This is a pack of two replacement Mugen HTD Differential Cup Outdrives for use with the optional HTD (High Traction Diff) Differentials.     

This is a pack of Mugen Seiki high quality steel 3x12.8mm Drive Shaft Joint Pins.   Compatibility     Mugen MBX5 Original Mugen MBX5R Mugen...

Unlock sharper handling and faster cornering with the Mugen Seiki 1.5mm Trailing Front Hub Carriers, an essential upgrade for racers looking to dominate tight, technical tracks with precision and...

Mugen Seiki MBX7 and MBX8 HTD S6 Silicon O-Rings. These replacement O-rings are intended for the MBX7 and MBX8 platforms...

 This is a pack of eight Mugen 4x8mm titanium flat head screws. These screws are intended for use with Mugen vehicles and are an excellent option to remove weight from other...

This is an optional Mugen Seiki 1.5mm Trailing Front Hub Carrier Set that can be used with CVA (MUGE0221 and MUGE0224) and universal driveshaft on all the MBX7 family of buggies, trucks, and GT...

Mugen Suspension Arm Spacer Set. This is a replacement Mugen Suspension Arm Spacer Set, and is intended for use with the majority of Mugen 1/8 Buggies and Truggies. Includes: (12) E0135A...

Mugen Big Bore Rear Damper Spring Set. Mugen's 1.4mm shock springs help to reduce the car-roll and pitching generated by steering and throttle input compared to the previous 1.5 and 1.6 springs. This...

Mugen Big Bore Front Damper Spring Set. Mugen's 1.4mm shock springs help to reduce the car-roll and pitching generated by steering and throttle input compared to the previous 1.5 and 1.6 springs...

This is an optional Mugen Big Bore Front Damper Spring Set, and is intended for use with the Mugen MBX6, MBX6T and MBX6-E. These springs are made with 1.5mm wire making them slightly lighter than the...

Mugen Big Bore Front Damper Spring Set. Mugen's 1.4mm shock springs help to reduce the car-roll and pitching generated by steering and throttle input compared to the previous 1.5 and 1.6 springs...

Mugen Big Bore Front Damper Spring Set. Mugen's 1.4mm shock springs help to reduce the car-roll and pitching generated by steering and throttle input compared to the previous 1.5 and 1.6 springs...

Mugen Big Bore Rear Damper Spring Set. Mugen's 1.4mm shock springs help to reduce the car-roll and pitching generated by steering and throttle input compared to the previous 1.5 and 1.6 springs. This...

These are the Damper Cap Bushings for the Mugen 1/8 MBX Buggy and Truggy Kits FEATURES: Nylon construction Black in color INCLUDES: Four Damper Cap Bushings REQUIRES: Installation on the vehicle

This is a set of two medium front shock springs from Mugen and are intended for use with the Mugen MBX6. These springs are 75mm in length, and have 9.25 Turns.

This is a set of two extra soft rear shock springs from Mugen. These springs are 86mm in length, and have 10.75 Turns.   

This is a pack of four link balls for Mugen buggies, trucks and sedans.  

Mugen Seiki Machined "B" Rear Hub Carrier Bushing Set. These bushings are compatible with MBX7 vehicles that are equipped with the optional Aluminum Universal Driveshaft Rear Hub Carriers (MUGE2134)...

This is a set of two Mugen front or rear axle shafts, and are intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.   

This is a set of two Mugen front or rear universal driveshafts, and are intended for use with the Mugen MBX6 1/8 scale buggy.  

This is a set of optional titanium rear camber rods for the Mugen MBX5 buggies. These are lighter and stronger than the stock parts.  

Mugen Seiki Machined "A" Rear Hub Carrier Bushing Set. These bushings are compatible with MBX7 vehicles that are equipped with the optional Aluminum Universal Driveshaft Rear Hub Carriers (MUGE2134)...

This is a pack of 8 3x16.8mm wheel hub pins for the Mugen MBX5 family of buggies. These are the small pins that are used to secure the wheel hubs to the axle drive shafts on the buggy.    

This is a set of four replacement Mugen 2.5x14.8mm Universal Joint Pins, and are intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.  

This is the optional titanium servo tie rod for the Mugen MBX5 buggies. This rod will be much lighter and stronger than the stock piece. If you are racing your buggy regularly, you should consider...

This is a set of replacement joint pins for the universals used in the Mugen MBX5 buggies, and are used to hold the universal joint together and go through the axle shafts and the joint shaft. 

This is a pack of two replacement Mugen Rear Hub Carrier Hinge Pins, and are intended for use with the Mugen MBX7 1/8 scale nitro buggy. These hinge pins secure the rear hub carrier to the rear arm.