LOSI

This is a replacement 10T, 1/8" shaft pinion gear for the Losi Mini 8ight.

This is a replacement Losi Combo Pull/Spin Start Assembly, and is intended for use with the Losi .26/427 Nitro Engine.Features:Get the economy of pull-start operation with the convenience of the...

TLR 3x6mm Flat Head Screw. Package includes ten screws.  

Replacement Losi center diff gear 46t.

Losi 8IGHT Nitro RTR Front Diff Gear & Pinion. This is the replacement front differential ring and pinion gear for the RTR buggy and truggy. Package contains one 47 tooth ring gear and one 12...

This is a pack of eight replacement #8 countersunk washers from Losi.

These are replacement Losi 4mm and 5mm Set Screws. Each pack contains six screws of each size. Set screws are used to secure drive yolks to pinion gears and outdrive cups to output shafts.

This is a replacement Losi Mini 8IGHT-T Hardware Set. Package includes all the screws and bolts used on the Mini 8IGHT-T.   

Uses one 5x10 and one 5x13mm bearing. These are available as a package under LOS6949 Clutch Bearing Set: 8B,8T or available separately under LOS6954 5x10 Shielded Ball Bearings (2) and LOSA6955 5 x...

Uses one 5x10 and one 5x13mm bearing. These are available as a package under LOS6949 Clutch Bearing Set: 8B,8T or available separately under LOS6954 5x10 Shielded Ball Bearings (2) and LOSA6955 5 x...

This is a set of two replacement 15mm top shock caps for the Losi 8IGHT racing buggy.

Features Plastic spur gears enhance the sound of gear mesh making the car quieterSpur gears are made of highly durable plastic that has been specifically designed for the rigors of 1/8-scale electric...

Features Made from aluminum alloy material Slows wear rate without sacrificing performance Minimal slip rate Lasts up to 3-times longer than other aluminum shoes Overview Guaranteed to pull more...

This is a replacement Losi 5mm and 6mm shim set. These shims are used in the transmission, differentials, and on crankshaft between clutchbell bearing and flywheel nut. These shims can also be used...

Sway Bar Set for the 8IGHT 2.0 Buggy includes one front 2.5mm sway bar, one rear 2.5mm sway bar and one rear 2.0mm sway bar

This is an optional Losi Aluminum Shock Collar Set for use with the Losi 810, TEN-T and TEN-SCTE.

Losi Front/Rear CV Driveshaft Set. Package includes the parts needed to assemble two complete CVD driveshafts that can be used in either the front or rear position.

Losi switch cover and receiver tray foam pad.

Losi Ten-MT replacement Chassis.

Features Dynamite® LiPo-compatible brushless ESC4500Kv brushless motorSpektrum™ SRS4210 receiver with Patented* AVC and 2.4GHz DSM® technology7.2V 1100mAh Ni-MH battery pack with...

Type a description for this product here...

This is a pack of twelve replacement 5mm e-clips from Losi.

Mini 8IGHT-T RTR, Maifield Edition:1/14 4WD TruggyEver since its introduction, the Losi® Mini 8IGHT-T™ has resonated with drivers. Now the Mini 8IGHT-T is ready to turn heads again with new...

Replacement front spindle carriers (steering knuckles) for the Losi 8IGHT buggy. These are the spindles that are used to steer the front wheels.

This is a pack of replacement engine mounts for the Losi 8IGHT racing buggy.

Losi Front Suspension Arm Set (8IGHT-T 2.0)

This is a pair of optional aluminum front spindles for the Losi 8IGHT off road buggy.

Features Crafted from hard-anodized 7.75 aluminumAllows users to reinstall engine without adjusting gear meshCan move engine 2mm forward to accomodate standard 4-shoe clutch or aftermarket clutches...

Replacement clutch shoes and springs from Losi.

Features High-quality springs and shims included Consistent performance Increased heat and dirt resistance Machined aluminum clutch shoes Overview The LOSB3323 Aluminum Clutch Shoe/Spring Set...