LOSI

Features Dynamite® LiPo-compatible brushless ESC4500Kv brushless motorSpektrum™ SRS4210 receiver with Patented* AVC and 2.4GHz DSM® technology7.2V 1100mAh Ni-MH battery pack with...

Mini 8IGHT-T RTR, Maifield Edition:1/14 4WD TruggyEver since its introduction, the Losi® Mini 8IGHT-T™ has resonated with drivers. Now the Mini 8IGHT-T is ready to turn heads again with new...

Replacement clutch shoes and springs from Losi.

Features High-quality springs and shims included Consistent performance Increased heat and dirt resistance Machined aluminum clutch shoes Overview The LOSB3323 Aluminum Clutch Shoe/Spring Set...

Replacement Losi Out Drive Cup, and is intended for use with the Losi XXX and XXX-T 1/10 scale vehicles.

Replacement rear shock tower for the Losi XXX-T

Optional Losi Long 3S, 20C, 1400mAh LiPo Battery with a factory installed EC2 Connector, and is intended for use with the Losi Mini 8IGHT.   Specifications Type: LiPo Capacity: 1400mAh Voltage:...

Losi Mini 8ight-T Hinge Pin Set (4)

Optional Losi 12 Tooth Pinion Gear, and is intended for use with the Losi Mini 8IGHT.

Ppack of eight replacement 8-32 x 1/8" flat point set screws from Losi.

Replacement gear cover with plug from Losi. This cover goes over the spur, and pinion gears.

Losi Front/Rear Suspension Arm Set

Losi Two Speed Low Gear Hub with One-Way Bearing (LST, LST2).

LOSI Self Stick Chassis Weight (3oz)

This is a replacement body post, and gear cover set from Losi.

This is a set of replacement Losi Front Suspension Arms, and are intended for use with the Losi Ten-T truck. The suspension arms are supported on the chassis by the hinge pins and are the mounting...

This is a replacement Losi Body Mount & Bumper Set, and is intended for use with the Losi Mini 8IGHT.  

Losi Ball Cup Set, and is intended for use with the Losi Mini 8IGHT.

Losi Mini King Pin Pre-Mounted Front Tire Set, and is intended for use with the Losi Mini 8IGHT.

Losi Suspension Mount Set, and is intended for use with the Losi Mini 8IGHT.

Features:   Ride Height Gauge will work with all 1/10- and 1/8-scale vehicles Rugged construction ensures the gauge will not fail or break easily Clear markings make the gauge easy to...

This is a pack of ten replacement 2-56 x 1/4" button head screws from Losi.  

Adjustable Hinge Pin Brace Inserts: 8B/8T

Features Dynamite® 4500Kv brushless motor and waterproof ESC Spektrum™ SR200WP Water Proof receiver with 2.4GHz DSM® technology Spektrum™ DX2L Radio7.2V 1100mAh NiMH battery...

Losi Rear Spring Set (2) (Hard) Losi Mini 8

Losi Front Shock Spring Set (2) (Soft) Losi Mini 8

Losi Front Shock Spring Set (2) (Hard) Losi Mini 8

Losi Rear Shock Spring Set (2) (Soft) Mini 8

Losi Turnbuckle Set: Mini 8ight