KYOSHO

UM801 Body Mount Set (ULTIMA SC6) Body mount set for Ultima SC6.

UM784 Rear Suspension Arm Set(RT6)

UM727 Step Wing 2.0 (M/RB6/RB5/ZX-5) Replacement wing for RB6. Medium sized step wing with raised sides for tire clearance.

UM726 Sus. Holder Set (RB6/MID Motor) Replacement rear suspension holders for RB6 Mid motor.

UM716 Crank Arm Set (RB6) Includes steering cranks, steering rack, 5x7x1m spacers x 4.

UM715 Front Hub Carrier Set (RB6) Front caster block set for RB6. Includes 2 ea. 0 deg, 2deg, 4deg inserts, 3x7x0.5m washers x 4, 3x7x1m washers x 4.

UM712 Front Suspension Arm Set (RB6) Replacement front arms for RB6.

UM702 Battery Holder Set (RB6) Includes Battery holder x 2, Battery posts x 2, Receiver perch high posts x 2, Receiver perch low posts x 2, Battery hold down x 1.

UM602B Bumper&Support Set(ULTIMA SC/SC6/SCR) Bumper and supports set for Ultima SC, SC6, and SCR.

UM524 Main Gear Shaft (8L/20T/RB5/RT5/SC) Extended main gear shaft for Ultima series cars and trucks. Must be used with UM523 Motor Offset Spacer.

UM519 Rear Hub Type-B(Off-4.7/for RB5) Standard replacement rear hubs for Ultima RB5SP, RT5, SC, SCR, DB, and Lazer FS. Optional camber holes for RB5SP2 and Lazer FS2 cars.

Front Knuckle and Hub Carrier Set Includes front spindles (2), caster blocks (2), steering rack, and plastic washers. For Ultima series cars and trucks.

UM128 4.8mm Ball Stud (L) Long ball stud (4Pcs).

Idle Gear Shaft Shaft for idler gear in Ultima series cars and trucks.

ORG03XR Grooved O-Ring (P3/for Oil Shock/Orange) X shaped O-rings for shocks. Reduces friction with the shock shaft for ultra smooth damping. Genuine Kyosho option parts for maximum performance and...

LA253 Axle Color(R-Hub Off-4.7/ZX-5 SP & RB5) Aluminum rear hub bearing crush spacer and wheel hex spacer.

LA228 Suspension Shaft(25)(ZX-5) 3X25mm hinge pin Genuine Kyosho replacement parts make maintenance fast and easy!

LA206-76 Spur Gear(48P-76T)(ZX-5) Optional 48 pitch 76 tooth spur gear for Ultima and Lazer series cars and trucks. Genuine Kyosho replacement parts make maintenance fast and easy!

IS106-9514 Big Shock Spring (M/Yellow/9.5-1.4/L=84) Medium 84mm shock springs, 9.5 coils of 1.4mm wire.

IS106-8514 Big Shock Spring (M/Orange/8.5-1.4/L=84) Medium 84mm shock springs, 8.5 coils of 1.4mm wire.

IS106-1116 Big Shock Spring (M/White/11-1.6/L=84) Big shock medium springs. Fits truggy front or buggy rear. White color / 11 coils of 1.6mm wire / 84mm overall length.

IS106-1016 Big Shock Spring (M/Purple/10-1.6/L=84) Big shock medium springs. Fits truggy front or buggy rear. Purple color / 10 coils of 1.6mm wire / 84mm overall length.

This is an optional Kyosho Aluminum Transponder Holder, and is intended for use with the Kyosho MP9 TKI3 1/8 Scale Buggy.

IFW408B Hard Rear Short Shock Stay (M-Size shock/MP9) Shock stay for installing M-size shocks on the rear.

IFW405-138 SP Shock Piston (1.3x8holes/2pcs/For Big Shock) Special piston with angled piston holes. Delivers smoother function during normal running but gives greater resistance on landings.

This is a Kyosho TKI3 Decal Sheet, and is intended for use with the Kyosho Inferno TKI3 1/8 scale buggy.

Kyosho 2.2mm Rear Stabilizer Bar

IF459-2.8 Front Stabilizer Bar (2.8mm/1pc/MP9)

Replacement Kyosho Mud Guard Set. This set also includes the mud scrapers.