JQ RACING

THE JQRacing Upper Link (Camber Link) Turnbuckle Set includes four Camber Link Turnbuckles that are used in either the front or rear. These are used to adjust the camber and roll center on the...

THE JQRacing 6mm Steering Servo Link Ball Set includes two pivot balls that are used in the steering servo link rod ends. One ball is threaded with a 5.5 hex shape, and the other is just a simple...

THE JQRacing 7mm Upper Link Ball Set includes four steel balls. These are the outer camber link pivot balls that are installed in the front or rear camber link rod ends and attached to the hubs.

THE JQRacing 7mm Threaded Ball with Nut Set includes four steel balls. These are the inner camber link pivot balls that are installed in the front or rear camber link rod ends and attached to the...

THE JQRacing Servo Saver Post Set includes both posts needed for a car. These posts are installed on the chassis, and hold the servo saver components in place.

THE JQRacing Fuel Tank Grommet Set includes 2pcs of these rubber bits. These grommets are used to help absorb vibration from the chassis to the fuel tank.

THE JQRacing Rear Differential Bearing Insert, just in case you don’t want to buy the complete rear gearbox but want to replace the bearing insert.

THE JQRacing Swaybar Holder Set includes two swaybar holders, one for the front, and one for the rear.

THE JQRacing Chassis Braces includes one front, and one rear brace. The rear brace is the original design, and as such is only compatible with THEeCar, the original THECar, and the...

THE JQRacing 7mm Ball For Shocks are optimised for the lower plastic shock end, making it easy to fit them in the arm.

THE JQRacing 20 degree C Hub (Right) (BE/WE)

THE JQRacing 20 degree C Hub (Left) (BE/WE)

THE JQRacing 1.0mm Clutch Spring Set includes 3 springs.

THE JQRacing Brake Pad Set includes four brake pads, enough for one car.

THE JQRacing M4 Countersunk Washers 10pcs (Gold) Bling Bling

THE JQRacing Aluminum Wingmount Posts (3pcs Green) are replacements for the stock plastic parts. They reduce flex, and increase rigidity of the rear wing mount, but in reality, are mainly a...

THE JQRacing Aluminum Wingmount Posts (3pcs Gold) are replacements for the stock plastic parts. They reduce flex, and increase rigidity of the rear wing mount, but in reality, are mainly a...

THE JQRacing Swaybar links include 2pcs plastic links, and 2pcs of each steel ball needed for mounting the links on the car.

THE JQRacing Airfilter Holder includes the filter housing, and filter neck.

THE JQRacing M3 Countersunk Washers 10pcs (Green) Bling Bling

THE JQRacing Aluminum Wingmount Posts (3pcs Black) are replacements for the stock plastic parts. They reduce flex, and increase rigidity of the rear wing mount, but in reality, are mainly a look...

THE JQRacing CNC High Wingmount R (Gold) raises the wing up higher, increasing stability specially at high speeds and while jumping. Definitely worth getting! You also need the Left...

THE JQRacing Rear Hub Spacers include 4pcs of the 2mm spacers needed for setting the position of the rear hubs.

THE JQRacing Center Differential Outdrive Set includes two center differential outdrives with their pins. These out drive cups are installed in the center differential and are the part that...

JQ Products White Edition LV 7-Hole 1.3mm Flat 16mm Shock Pistons. These are the updated White Edition LV shock pistons that are used in the rear shocks with the stock setup but can be used in the...

This is a replacement JQRacing Easy Adjust Linkage Set in Black.

THE JQRacing Differential O-Ring Set includes 6 o-rings, enough for all three diffs. They are installed inside the differential cup, as well as on the ring and spur gears, and are used seal the...

THE JQRacing Differential Gear and Crosspin Set includes two sun gears, four planetary gears, all gear shims, and two cross pins.

THE JQRacing Universal Centre Shaft 86mm, is intended for use in the front centre, when the centre diff is mounted in the mid to front positions. If you are running the centre diff towards the...

THE JQRacing 86mm Center Dogbone, for the front, with the centre diff set in the mid to front positions. Aluminium dogbones make the drivetrain as light as possible, one of our goals with the...