JQ RACING

THE JQRacing Centre Diff Mount Top Cover (White Edition)

THE JQRacing Centre Diff Mount Top Rear (White Edition)

THE JQRacing Centre Diff Mount Plate (White Edition)

THE JQRacing Centre Diff Mount - Rear

Centre Diff Mount Front

THE JQRacing Radio Plate for Battery Front/Rear Radiotray

THE JQRacing Rear Anti-Squat Block is CNC machined from high quality aluminum, and uses plastic inserts to adjust the anti-squat geometry between 1 and 3 degrees. The stock setting uses a 0 insert,...

THE JQRacing 2.5mm Rear Swaybar, for the JQ Racing 1:8 Buggies Swaybars are a useful tool that can be used to change the balance of the car, and are used to adjust the car̥s lateral grip. The basic...

THE JQRacing 2.3mm Front Swaybar, for the JQ Racing 1:8 Buggies Swaybars are a useful tool that can be used to change the balance of the car, and are used to adjust the car̥s lateral grip. The...

THE JQRacing 47 Tooth Maingear for the centre differential.

THE JQRacing Brake Cam and Lever Set includes two brake cams, and two levers for the White Edition kit. More info about how to setup your brakes properly can be found HERE.

THE JQRacing 2013 Throttle Servo Arm Set is intended for use with the new radiotray, as the throttle arm is updated. The set includes all three types, 23, 24 and 25 tooth splines.

THE JQRacing Front Springs Hard (Black) includes two 70mm, 7 coil springs that are a good option for the front of THEeCar.

THE JQRacing Steering Turnbuckle Short (Oldschool Ackerman Plate) includes two turnbuckles. These are intended for use with the Alternative Ackermann Plate JQB0211. They are shorter than the...

THE JQRacing Swaybar Stoppers keep the rear swaybar centered and working correctly. They are mainly used on the rear swaybar, but can be used on the front also.

THE JQRacing Differential Crosspins (2pcs)

THE JQRacing Aluminum Lightweight Servo Saver Post Set includes two posts. These are direct replacements for the stock parts, and are much lighter than the stock steel posts.

THE JQRacing Wheel Nuts, 4pcs. Give your car a trick look, and shed some weight! Make sure you keep them tight!

THE JQRacing 14 Tooth Clutch Bell includes one 15 tooth clutch bell, and two 5×10mm bearings.

THE JQRacing Lightened Center Bevel Gear Outdrive Set includes two extra light outdrives, with the needed M5x4 grubscrews. These outdrive cups are installed on the front or rear bevel gear, and are...

THE JQRacing Lightened Center Differential Outdrive Set include 2pcs of the extra light outdrives. They make the drivetrain as light as possible, one of our goals with the design. A lighter...

THE JQRacing 3-Shoe Clutch Nut with Collet includes one clutch nut, and one collet.

THE JQRacing Pipe Mount with Hangar, and is intended for use with JQRacing THE Car.

THE JQRacing Linkage Collar Set includes 3 large collars, and 1 small collar.

THE JQRacing Engine Mount Set is CNC machined from high quality aluminium, and it features a quick change design that allows you to easily remove the engine from the chassis without needing to...

THE JQRacing Wheel Nuts, 4pcs. Make sure you keep them tight!

THE JQRacing 4.3mm Hex Hub Set with included Wheel Nuts includes four hex hubs, and four wheel nuts.

THE JQRacing Gearbox Screw set includes 4pcs of these long M4 screws, that secure the two halves of the gearbox, along with the front and rear arm holders together.

THE JQRacing Wheel Bearing Spacer Set includes 4pcs, enough for one car. These crush spacers are added between the wheel bearings to prevent the bearings from binding when the hex pin grubscrew is...

THE JQRacing Centre Bevel Gear Outdrive Set includes two outdrives, with the needed M5x4 grubscrews. These outdrive cups are installed on the front or rear bevel gear, and are used to transfer the...