JQ RACING

THE JQRacing Brake Cam and Lever Set includes two brake cams, and two levers for the White Edition kit. More info about how to setup your brakes properly can be found HERE.

THE JQRacing Front Springs Hard (Black) includes two 70mm, 7 coil springs that are a good option for the front of THEeCar.

THE JQRacing Steering Turnbuckle Short (Oldschool Ackerman Plate) includes two turnbuckles. These are intended for use with the Alternative Ackermann Plate JQB0211. They are shorter than the...

THE JQRacing Swaybar Stoppers keep the rear swaybar centered and working correctly. They are mainly used on the rear swaybar, but can be used on the front also.

THE JQRacing Differential Crosspins (2pcs)

THE JQRacing Aluminum Lightweight Servo Saver Post Set includes two posts. These are direct replacements for the stock parts, and are much lighter than the stock steel posts.

THE JQRacing Wheel Nuts, 4pcs. Give your car a trick look, and shed some weight! Make sure you keep them tight!

THE JQRacing Lightened Center Bevel Gear Outdrive Set includes two extra light outdrives, with the needed M5x4 grubscrews. These outdrive cups are installed on the front or rear bevel gear, and are...

THE JQRacing Lightened Center Differential Outdrive Set include 2pcs of the extra light outdrives. They make the drivetrain as light as possible, one of our goals with the design. A lighter...

THE JQRacing 3-Shoe Clutch Nut with Collet includes one clutch nut, and one collet.

THE JQRacing Pipe Mount with Hangar, and is intended for use with JQRacing THE Car.

THE JQRacing Linkage Collar Set includes 3 large collars, and 1 small collar.

THE JQRacing Engine Mount Set is CNC machined from high quality aluminium, and it features a quick change design that allows you to easily remove the engine from the chassis without needing to...

THE JQRacing Wheel Nuts, 4pcs. Make sure you keep them tight!

THE JQRacing 4.3mm Hex Hub Set with included Wheel Nuts includes four hex hubs, and four wheel nuts.

THE JQRacing Gearbox Screw set includes 4pcs of these long M4 screws, that secure the two halves of the gearbox, along with the front and rear arm holders together.

THE JQRacing Wheel Bearing Spacer Set includes 4pcs, enough for one car. These crush spacers are added between the wheel bearings to prevent the bearings from binding when the hex pin grubscrew is...

THE JQRacing Centre Bevel Gear Outdrive Set includes two outdrives, with the needed M5x4 grubscrews. These outdrive cups are installed on the front or rear bevel gear, and are used to transfer the...

THE JQRacing Upper Link (Camber Link) Turnbuckle Set includes four Camber Link Turnbuckles that are used in either the front or rear. These are used to adjust the camber and roll center on the...

THE JQRacing 6mm Steering Servo Link Ball Set includes two pivot balls that are used in the steering servo link rod ends. One ball is threaded with a 5.5 hex shape, and the other is just a simple...

THE JQRacing 7mm Threaded Ball with Nut Set includes four steel balls. These are the inner camber link pivot balls that are installed in the front or rear camber link rod ends and attached to the...

THE JQRacing Servo Saver Post Set includes both posts needed for a car. These posts are installed on the chassis, and hold the servo saver components in place.

THE JQRacing Fuel Tank Grommet Set includes 2pcs of these rubber bits. These grommets are used to help absorb vibration from the chassis to the fuel tank.

THE JQRacing Rear Differential Bearing Insert, just in case you don’t want to buy the complete rear gearbox but want to replace the bearing insert.

THE JQRacing Chassis Braces includes one front, and one rear brace. The rear brace is the original design, and as such is only compatible with THEeCar, the original THECar, and the...

THE JQRacing 7mm Ball For Shocks are optimised for the lower plastic shock end, making it easy to fit them in the arm.

THE JQRacing 20 degree C Hub (Right) (BE/WE)

THE JQRacing 20 degree C Hub (Left) (BE/WE)

THE JQRacing 1.0mm Clutch Spring Set includes 3 springs.

THE JQRacing Brake Pad Set includes four brake pads, enough for one car.