JQ RACING

THE JQRacing 16mm Shock Bladder includes 4pcs of this standard bladder for the 16mm Shocks.

THE JQRacing Centre Diff Mount Top Cover (White Edition)

THE JQRacing Centre Diff Mount Top Rear (White Edition)

THE JQRacing Centre Diff Mount Top Front (White Edition)

THE JQRacing Centre Diff Mount Plate (White Edition)

THE JQRacing Centre Diff Mount - Rear

Centre Diff Mount Front

THE JQRacing Radio Plate for Battery Front/Rear Radiotray

THE JQRacing Rear Anti-Squat Block is CNC machined from high quality aluminum, and uses plastic inserts to adjust the anti-squat geometry between 1 and 3 degrees. The stock setting uses a 0 insert,...

THE JQRacing 2.5mm Rear Swaybar, for the JQ Racing 1:8 Buggies Swaybars are a useful tool that can be used to change the balance of the car, and are used to adjust the car̥s lateral grip. The basic...

THE JQRacing 2.3mm Front Swaybar, for the JQ Racing 1:8 Buggies Swaybars are a useful tool that can be used to change the balance of the car, and are used to adjust the car̥s lateral grip. The...

THE JQRacing 47 Tooth Maingear for the centre differential.

THE JQRacing Brake Cam and Lever Set includes two brake cams, and two levers for the White Edition kit. More info about how to setup your brakes properly can be found HERE.

CNC Servo Arm for 2013 Radio Tray (Futaba)

THE JQRacing 2013 Throttle Servo Arm Set is intended for use with the new radiotray, as the throttle arm is updated. The set includes all three types, 23, 24 and 25 tooth splines.

THE JQRacing 2013 Throttle Servo holder is to be used with the new radiotray. It includes the switch and antenna mounts, and braces the throttle servo.

THE JQRacing 2013 Rear Radio Box provides the option of running either your receiver or your battery at the back. Most drivers run a hump pack receiver pack in this front box, and the receiver in...

THE JQRacing 2013 Front Radio Box provides the option of running either your receiver or your battery up front. Most drivers run a hump pack receiver pack in this front box, for better handling in...

THE JQRacing Long Throttle Linkage, and Bent Brake Linkage, is intended for use with the wide chassis. Super simple and straight forward. That’s how we roll. More info about how to setup your...

THE JQRacing Complete Rear Diff (43/13) includes all the required parts, except the diff oil, to assemble a complete differential.

THE JQRacing Complete Centre Diff (45t) includes all the required parts, except the diff oil, to assemble a complete differential.

THE JQRacing Complete Front Diff (43/13) includes all the required parts, except the diff oil, to assemble a complete differential.

THE JQRacing Sideguards for the Flex Chassis

THE JQRacing Rear Spring Hard (Black) includes two 85mm, 8 coil springs that are a good option for the rear of THEeCar.

THE JQRacing Front Springs Hard (Black) includes two 70mm, 7 coil springs that are a good option for the front of THEeCar.

THE JQRacing Steering Turnbuckle Short (Oldschool Ackerman Plate) includes two turnbuckles. These are intended for use with the Alternative Ackermann Plate JQB0211. They are shorter than the...

THE JQRacing Swaybar Stoppers keep the rear swaybar centered and working correctly. They are mainly used on the rear swaybar, but can be used on the front also.

THE JQRacing Differential Crosspins (2pcs)

THE JQRacing Aluminum Lightweight Servo Saver Post Set includes two posts. These are direct replacements for the stock parts, and are much lighter than the stock steel posts.

THE JQRacing Chassis O-Ring (2pcs). Genius system for sealing the plastic gearbox to the chassis. No hassle, always works!