HOT BODIES

Beach RC says.... This is a replacement Hot Bodies D815 Brake Linkage Set...

Beach RC says.... HB Racing M3 Flush Mount Fastener Screw. This is the replacement screw used to mount the chassis side guards on the D813, and may be used for other applications as well. Package...

Beach RC says.... HB Racing D817 Body Mount Set. Package includes front and rear body mounts...

Beach RC says.... This is a replacement package of three Hot Bodies differential gaskets for the Lightning Series, as well as the D8 and D8T 1/8 vehicles. These are used to seal the differential...

Beach RC says.... These front suspension arms are made from harder material for increased arm stiffness. These are standard equipment on the RGT8, and after testing with factory off-road drivers,...

Beach RC says.... This is an optional front universal joint set designed for use with the HB Racing D817T...

Beach RC says.... This is a replacement Hot Bodies D815 V2 Rear Sway Bar Set. Package includes 2.2, 2.4, 2.6, 2.8 and 3.0 sway bars...

Beach RC says.... HB Racing D817 Arm Mount D - 2.75°. This is the optional 2.75° rear toe block and has .25 less rear toe in compared to the stock 3.0° block. Package includes one rear...

Beach RC says.... HB Racing D817 Front Universal Set. These universal shafts are precision machined from high strength steel and are standard replacement parts for the D817 buggy. These can also be...

Beach RC says.... This is a pack of two optional HB Racing 5x59mm Titanium Turnbuckles...

Beach RC says.... This is a replacement HB Racing Caster Block Set V3, with 17.5 degrees of caster...

Beach RC says.... This is a replacement set of M3x8mm washers...

Beach RC says.... This is a replacement set of Hot Bodies Swaybar Links intended for use with the Hot Bodies Racing D418 1/10 4WD Electric Off-Road Buggy Kit. These sway bar links are fully...

Beach RC says.... This is a replacement Hot Bodies D815 Differential Parts Set. Package includes diff gears, diff housing, gasket pins and hardware. These parts can be used in the front, center or...

Beach RC says.... This is an optional HB Racing D817 V2 Center Bulkhead Stiffener...

Beach RC says.... This is a replacement Hot Bodies D815 Input Shaft Clip & Shim Set. Package includes four clips and four shims...

Beach RC says.... This is an optional HB Racing V3 Big Bore Shock Cap Set, including two caps, cap inserts and bleeder screws...

Beach RC says.... This is a set of 38 mm stroke shock shafts (+5mm...

Beach RC says.... This is a set of long shock ends v2...

Beach RC says.... This is a set of two optional Hot Bodies light weight 17mm wheel hubs, and are intended for use with the Hot Bodies D8 and D8T 1/8 scale vehicles. Replace the original parts with...

Beach RC says.... This is a replacement Hot Bodies Hardened Steel Differential Gear Set and is intended for use with the Hot Bodies D8, D8T and Ve8, as well as the previous generation Hot Bodies 1/8...

Beach RC says.... HB Racing D817 Arm Mount D - 3.5°. This is the optional 3.5° rear toe block and has .5 more rear toe in compared to the stock 3.0° block. Package includes one rear toe...

Beach RC says.... HB Racing D8 Series V2 Diff O-Rings. This is the updated V2 o-ring included with the D817 as standard equipment. These are compatible with the full range of HB D8 vehicles. Package...

Beach RC says.... This is an optional Hot Bodies 2 dot B Plate Arm mount, and is intended for use with the D817 V2 1/8 Off-Road Competition Nitro Buggy Kit. This Front Suspension B-Mount is a middle...

Beach RC says.... This is a set of two optional Hot Bodies light weight steering posts, and are intended for use with the Hot Bodies D8 and D8T 1/8 scale vehicles. Replace the original steel parts...

Beach RC says.... These rear suspension arms are made from harder material for increased arm stiffness. These are standard equipment on the RGT8, and after testing with factory off-road drivers,...

Beach RC says.... Hot Bodies D216 Gear Differential Seal. Package includes three replacement diff seals...

Beach RC says.... The HB Racing D819 Hub Carrier Arm v2 is a D819 option that allows you to adjust the Ackermann geometry in the steering rack. Ackerman affects how aggressive the car feels. More...

Beach RC says.... This is a pack of eight replacement HB Racing 2x5.36x1.8mm O-Rings...

Beach RC says.... This is a pack of four replacement Hot Bodies 6.8mm Steering Ball Ends...