The simple FPV camera mount allows for angles up to 90 degrees allowing you to choose just how fast you want to go
The extremely tough bottom plate provides an XT60 connector cutout for mounting your battery lead to prevent prop strikes in air
The compact frame design is open enough to place electronics easily within a condensed profile
Specifically designed for 4” propellers and recommended 2300Kv to 2650Kv motors for optimal performance

Overview

The Blade® Theory™ X Frame Kits are designed for durability, simplicity, and speed. Constructed exclusively for racing, the assembled kit containing composite plates, and all recommended equipment has a flying weight of only 400-450g. The airframe features multiple motor mounting holes to fit a variety of motors and the cover plate includes cutouts for a variety of connectors and video transmitter as well as the XT-60. The camera mount is highly adjustable and can angle from 45 to 90 degrees. Advanced FPV pilots and those experienced in building quadcopters from scratch, will appreciate the compact design featuring enough room for all electronics and a GoPro camera. Its true X design provides an excellent feel in the air with more agility, the opportunity to hit top speeds, and the ability to reach the finish line first.

Theory X 170 (4”) Advantages
The advantages to using a smaller, 4” propeller racer is agility. A smaller profile means you can turn and corner much faster around flags and gates in a race, a significant advantage over other sizes in a tighter, more technical race course.

Tech Notes

You will need...
Transmitter/Receiver
FPV Camera
Video Transmitter
Flight Control
(4) ESCs
(4) Motors
Battery
Video Antenna
Power Distribution Board
(4) Propellers
1.5mm Hex Wrench
2mm Hex Wrench
Thread lock

Specifications

Gross Weight: Flying 14.1-15.8oz (400-450g) Airframe 3.7oz (105g)
Kit/ARF/RTF: Kit
Rotor Blade Length: 5 inch maximum
Experience Level: Intermediate
Is Assembly Required: Yes