Sold Out
Guaranteed Fitment
Always the correct part
have questions?
Always the correct part
We know our products
Mounting, Balancing
Free shipping on orders $100+
Beach RC says....
The ready-to-run Axial® Capra™ 1.9 Unlimited Trail Buggy is a “new from the ground up” design that any RC enthusiast eager for cutting-edge crawling will appreciate. Its Currie F9 Portal Axles provide extra ground clearance at the diff pumpkin for the best crawling performance. With the included Spektrum™ STX3 3-channel transmitter and DIG transmission, you can also switch on the fly between 4WD and FWD — locking the rear axle whenever you need the tighter turning radius of front drive power. The Capra features a realistic tube chassis design and metal gears everywhere, from the center transmission to the lockers and portal axles. It rides on real-world inspired Nitto Trail Grappler 1.9 tires mounted to licensed Raceline 3-piece molded beadlock wheels. For pioneering performance in an RC trail buggy with factory-assembled ease, choose the Capra 1.9 Unlimited RTR. Then just add batteries and get crawling!
The Currie F9 Portal Axles add substantially more ground clearance at the diff pumpkin while also providing an excellent 7.39:1 gear ratio. Completely ball bearing driven, and metal gears throughout for durability.
The ring and pinion gears are machined steel, including the locker. The design utilizes a six bolt design for durability.
The ground up designed transmission features a "Dig" function. With the new STX3 transmitter, the user can "switch" between 4WD and locking the rear axle while powering with front drive only, allowing for tighter turning radius on the rocks. The transmission also includes a full set of ball bearings and all metal internal gears for strength and durability. Micro Dig Servo SPMSSX107 included!
Universal joint axles allow up to 45 degrees of steering and provide smoother action for a higher performing, efficient drivetrain.
WB8 HD Wildboar™ front and rear driveshafts feature a larger diameter cross pin (2x11mm) along with an M4 Screw Shaft (2mm hex drive) for greater strength. A center splined slider floats between each end and has added material to reduce flex and fatigue.
Strong 6mm stainless steel links with high grade plastic rod ends for durability. All links are metal including the steering.
All pivot points are on stainless steel balls that provide a durable, long-lasting suspension point.
The Capra features a small skidplate footprint with boat sides to help maneuver and slide over rough, challenging obstacles.
The steering links are also made from 6mm stainless steel, offering precise steering and durability.
The oil-filled shocks are an all-new design with hard anodized, threaded shock bodies and a single coilover spring. Their increased bore size creates more fluid volume for better performance. A bleed screw helps to bleed air from the shock during assembly for greater consistency. The shocks are also tunable so you can achieve the best dampening rate.
Fine-tuned suspension geometry with multiple mounting locations for the upper link mounts to provide the best crawling capabilities.
Get a secure grip on dirt, rocks, and all other off-road trails from the S30 compound Nitto Trail Grappler 1.9 tires.
For striking scale looks and serious trail performance, Axial® has outfitted the Capra™ with 3-piece licensed Raceline beadlock wheels.
Realistic scale details include: polycarbonate interior tray with molded driver figures, full color pre-cut decals with simulated carbon fiber panels, mock GPS navigation gauges and switches, two black styrene helmets with visor decals, and more!
The molded plastic front grille features two clear plastic headlight lenses with light buckets and a white LED light installed in each. Behind the grille, under the hood, are two hood mounts with clips. Remove the clips to raise the hood up and gain access to the battery tray.
Remove the clips hidden on the underside of the tube frame to raise the hood up and gain access to the battery tray.
The servo horn features a 23T press fit metal insert for durability.
The battery tray is forward mounted, and located under the hood. The tray size is built for shorty packs, at a maximum size of 26mm x 98mm x 47mm.
Delivering an even balance of speed and technical crawling, the included 540 size, 35T motor features a hassle-free design with enlarged cooling ports for extended periods of use.
The STX3™ 3-channel radio system offers many features of higher-end 2.4GHz radio systems like throttle/steering reversing, throttle/steering travel adjust & throttle limiting, as well as third channel button controls for dig operation.
The SRX300 is a 3 channel 2.4GHz receiver that operates on the FHSS modulation. It is conformal coated to help prevent damage from water, dust and other elements. Features an extra-long antenna lead for easy and effective antenna placement.
The Dynamite AE-5L ESC is 3S LiPo capable yet easily switched “in the field” between LiPo and NiMH battery types with a simple jumper – no more complex procedures.
The Spektrum S614 metal geared servo offers 201 oz-in of steering torque, a metal case for strength, and it’s waterproof for extra protection against the elements. The axle-mounted servo allows better steering control in full articulation.
A roof mounted LED light bar helps light the way on those late night crawls with your friends. LED Light bar and two front mounted LED lights are included.
| Charger | Sold Separately |
| Bushing Material | Metal |
| Chassis | Injection molded tubular |
| Differential | Locked |
| Drivetrain | 4WD |
| Final Drive Ratio | 37:1 |
| Front Track | 8.75 in (222.2mm) |
| Power Type | Electric |
| Product Height | 8.25" (209.5mm) |
| Product Length | 17" (431.8mm) |
| Product Weight | 4.5lbs (2.04kg) |
| Product Width | 10.25" (260.35mm) |
| Radio | Included |
| Rear Track | 8.75 in (222.2mm) |
| Receiver | Included |
| Gear Pitch | 32-Pitch |
| Ground Clearance | 3" (76.2mm) |
| Internal Gear Ratio | 5.14:1 |
| Max Battery Dimensions | 1.02 x 3.8 x 1.8" (26 x 98 x 47mm) |
| Motor Size | 540 35T |
| Outer Diameter | 4.7 in (119mm) |
| Motor Type | Brushed |
| Servos | SX107 micro metal gear high torque steering servo, axle mounted for better steering in full articulation |
| Shock Type | Aluminum body, oil-filled, coil-over spring |
| Scale | 1/10 |
| Pinion | 14T |
| Approximate Assembly Time | No assembly required |
| Ball Bearings | Full set |
| Battery | Shorty configuration (sold separately) |
| Brakes | Integral with ESC |
| Tire Tread | Trail Grappler |
| Tire Compound | S30 |
| Wheelbase | 12.5" (317.5mm) |
| Water-Resistant | Yes |
| Speed Control | Included |
| Suspension | 4-link solid axle |
| Wheel Type | Raceline 3-piece beadlock monster |
| Wheel Width | 1" (25.4mm) |
| Wheel Hex Size | 12mm |
Wallie builds is the top option for any racer looking to have the best available car at the track. These kits are built to be winners and give you the best opportunity for wins and podiums.
- Wallie Builds will cover shipping charges to anyone in the US.
- Once the sale leaves beachRC and arrives at Wallie Builds we will take full responsibility for the order.
- Anything with the build will be handled by Wallie Builds.
