1RC RACING

Includes (1) V/W-type, rh, engine and header assembly (1) V/W-type, lh, engine and header assembly   Important Note: This is a 3D printed part, it is not molded.  This part can...

1/18 Vintage Midget, Airbox Hood, DIY Kit, Clear   Please take note: This is a "Do It Yourself" style kit and requires modifications to some parts in order to complete the assembly...

1/18 Vintage Midget, Flat Hood, DIY Kit, Clear   Please take note: This is a "Do It Yourself" style kit and requires modifications to some parts in order to complete the assembly. This is...

1/18 Sprint Car, Red, Ready-to-Run.   NOTE- On this clear car, the top and front wing come un-assembled and not attached to the car so you can paint the parts before you install them...

Includes: (1) 230mAh Nickel Metal Hydride 5-Cell Battery with JST connector   IMPORTANT NOTE: An aftermarket charger is needed to charge this battery.  The stock charger that comes...

Includes: (2) Solid kingpins (1) 2mm drill bit   Note:  This upgrade requires modifications to spindles and front axle.  Please read instructions in link below to ensure you...

Includes: (1) 1.5mm L-wrench (1) 4mm metal nut wrench for wheel removal

Includes: (10) Steel Nylock Nuts, M2 x 0.4mm x 4mm

Includes: (4) Fully assembled shocks (4) 1mm spring clips for spring preload (4) 2mm spring clips for spring preload

Includes: (1) Engine header set - Black

Includes: (1) Engine header set - chrome

Includes (2) Front wheel covers - sprint car (2) Rear wheel covers - sprint car (Car components shown in images not included) Important Note: This is a 3D printed part, it is not molded...

Includes (10) Shock shaft friction o-ring

Includes: (10) Steel Ball Studs, 2.5mm x 3mm (10) Steel Ball Studs, 2.5mm x 4mm (2) Steel Pivot Balls, 3.0mm x 2.2mm x 1.5mm Hole

Includes: (1) Right side cage (1) Left side cage (1) Visor crossbar (1) Rear top crossbar (1) Rear crossbar (1) Front crossbar skid plate (1) Upper side cross bar (1) Hood crossbar (1)...

Includes (1) Motor heat sink   Note - This part will work on the midget car.

Includes (1) 8700Kv brushless motor with pressed on 10 tooth pinion gear (0.4M)

These bearings replace the stock rear axle bushings and provide more support to the rear axle and improve gear mesh. Includes: (2) 3mm x 6mm x 2.5mm flanged steel ball bearings

Includes (4) 2mm x 5mm x 2mm steel ball bearings (2) 3mm x 6mm x 2.5mm steel ball bearings (2) 3mm x 6mm x 2.5mm flanged steel ball bearing (1) Bearing shim - this shim is used on left rear of...

Includes (4) 2mm x 5mm x 2mm steel ball bearings (4) 3mm x 6mm x 2.5mm steel ball bearings

Includes: (2) Pre-mounted front tires with Hoosier logo on chrome wheels (2) Pre-mounted rear tires with Hoosier logo on chrome wheels

Includes: (2) Pre-mounted front tires with Hoosier logo on black wheels (2) Pre-mounted rear tires with Hoosier logo on black wheels

Includes: (1) Top wing center section (1) Top wing left side board (1) Top wing right side board (1) Top wing mount (2) Top wing nut plate (1) Front wing center section (1) Front wing left...

Includes: (1) Hood, standard, clear (1) Tail tank, clear (1) Driver figure, clear (1) RH side panel (1) LH side panel (1) Nut plate (1) Headrest (1) Helmet Hardware not inluded Note -...

Includes (1) LHS engine stickers (1) RHS engine stickers

Includes: (1) Metal left nerf bar (1) Metal right nerf bar (1) Metal rear bumper (1) Metal front bumper

1/18 Sprint Car, Black, Ready-to-Run.   NOTE- On this clear car, the top and front wing come un-assembled and not attached to the car so you can paint the parts before you install them...

1/18 Sprint Car, Black, Ready-to-Run.   NOTE- On this clear car, the top and front wing come un-assembled and not attached to the car so you can paint the parts before you install them...

1/18 Sprint Car, Black, Ready-to-Run.   NOTE- On this clear car, the top and front wing come un-assembled and not attached to the car so you can paint the parts before you install them...

Includes: (1) RH side panel - flat black - styrene material (1) LH side panel - flat black - styrene material   Note:  These panels are not cut-out and will need to be cut-out and...